Samsung SNB-3000(P) user manual To reset the system, To set the Https

Page 57

4.When the software update is completed, you will be prompted to restart the system.

5.Click [OK] to restart the system.

Since the current connection is disconnected, you have to connect to the system again.

J	 If the network is disconnected, the power supply fails, or the PC abnormally operates during the
	update, the system does not work at all.

To reset the system

Restart or reset the system if it does not work properly or causes a problem. Select <system> - <reset>.

The Reset window appears.

Restart : Restarts the system.

Factory default : Resets the system

settings to the factory defaults with following two options:

-Except network parameter : Resets all settings except for the Network Parameters.

-All : Restores all settings to the default.

This works the same as pressing the [RESET] button on the rear of the camera.

J	 After the system is reset or restarts, you should try to connect to the camera again.
	 It takes several minutes until the system completes rebooting. Wait until the system rebooting is
	completed and try to connect again.
	 After executing <Factory default>, you must run the <IP Installer.exe> program to change the
	basic network settings such as IP address, Subnet mask, Gateway, etc., before you can connect to
	the Internet.

To set the HTTPS

1.Select <System> - <HTTPS>. The HTTPS setup window appears.

Secure connection system : Select a secure connection system to use. To use the secure connection mode requiring the public certificate for the secure connection system, you must have installed a signed certificate issued by a certificate authority on your system.

Install a public certificate : To install the certificate to camera, you need to type a certificate name (it can be arbitrarily assigned by user), certificate file issued from the authority and a key file. When done, click [Install].

If the certificate is installed successfully, the user-defined certificate name will be displayed. Also, the option button of <HTTPS (Secure connection mode using the public certificate)> in the upper side becomes activated.

n ee cr p S●tuSe

English _57

Image 57

Contents Network Camera Overview English Overview FCC Statement Important safety instructions Contents Web viewer Setup screen Appendix Product Features Precautions Installation and Use CPU Pentium4 / 2.4GHz or higher What’s Included Compatible Poe SwitchesCompatible Ip Routers Lens OptionsFront Side At a GlancePower Rear SideSystem GND Mounting the lens Disconnect the power before proceedingMounting the CS lens Mounting the C lensFocusing Connecting the Auto Iris Lens connectorInserting/Removing an SD Memory Card Inserting an SD Memory CardSlot when released What is a memory card?Memory Card Information not included Removing an SD Memory CardMemory Card Use Contacts Lock SwitchMemory Card Components SdhcConnecting to the monitor Connecting with Other DevicePower Supply Network ConnectionMicrophone Connecting to Audio Input/OutputLINE-IN LINE-OUT Speaker Pre-AmpNetwork Audio I/O Block DiagramConnecting to the I/O port box Alarm I/O Wiring Diagram3 4 You can configure the camera settings using the Web Viewer How to use the menu key Profile Factory Defaults  System Info Camera SET  Privacy ZoneCamera Setup Camera IDIris DNR MotionShutter SENS-UPWhite BAL DAY/NIGHT DAYNIGHT / NIGHTDAY If set to Any excessively bright area in a night scene will be maskedDetail Digital ZoomAGC Color SUP ReverseSetting Zone SetupSelect Point You will see dots on the screenOthers Factory DefaultOSD Color You can set the font color of the user interfaceLanguage SignalYou can check the system information You can select a language to your preferenceDownload and upgrade with the latest S/W version available Network connection and setupSelect Status from the Settings menu of the IP Router Network connection and setupSetting the IP Router Connecting to the camera from a local PC in the LAN Connecting the Camera Directly to Local Area NetworkingIP Address Setup Buttons used in IP InstallerURL Manual Network Setup Static IP SetupAuto Set Support this functionWill be adjusted according to the Http port value Http//192.168.1.20110000 Auto Network SetupDynamic IP Environment Setup Dynamic IP SetupManual Port Range Forwarding Port Range Forward Port Mapping SetupConnecting to the camera from a remote PC via the Internet Connecting to the camera from a shared localAddress bar of the Internet browser Ex http//mfffe42.websamsung.netUsing URL Connecting to the cameraConnecting via URL If the Http port is other than Normally, you wouldLogin Administrator ID, admin, is fixed and can not be changedTo check the Ddns address For Windows XP Service Pack 2 users Installing ActiveXPopup setting as follows Current siteAUsing the Live Screen To capture the snapshot BackupTo print out the screenshot To record a videoClick on the scene to record Web viewer Sd Search Viewer Screen layout Using ThE Sd SEARCh Viewer ScreenDefault Setup Accessing the Setup screenTo configure the video & audio settings  Contrast Adjust the contrast fromTo configure the IP settings Differently with each other To set the user account Click Basic User User setup window appearsWhen done, click Apply Selected language will be applied To set the display languageClick Basic Language PC time configuration settings To set the date/timeTo time To update the software To check the log informationSelect system log Log information list appears To set the Https To reset the systemTo Set IP Filtering Overlay SetupTo set the text Form of https//CameraIPTo set the event transfer function Event SetupProvider To test the FTP transfer Click TestSetup screen To set an alarm image To setup the recordTo set the alarm input To Set Intelligent Video Analysis Setup screen To set the scheduled transfer Network Setup To set the video transfer modeTo set the Ddns ALC DAY ModeLens Level Backlight Night BurstTerminology Cavlc Bitrate Control CBRConstant Bitrate English Specifications RAM CS/CDSP 4CIFHTTPS, SSL, Dhcp SetupARP, DNS, DDNS, Vsip DdnsNtsc Http APISDK Frame Rate Ntsc  Test Condition Mjpeg ResolutionCIF, Quality1, Frame rate1MPEG4 4CIF EstimationHPel264 4CIF MPEG4 VGA 264 VGA MPEG4 CIF 264 CIF Frame Rate PAL Kbps 16 FPS MPEG4 VGA Kbps 17 FPS MPEG4 CIF 264 CIF Problem Solution NTP must be properly configured  Verify the settings in the following sequenceAlarm Video Transmission must be enabled Analysis settingPreamble GNU General Public License GPL S/W  Lgpl S/WProgram, and can be reasonably Page Page No Warranty GNU General Public License You must show them these terms so they know their rights Terms and ConditionsSource Code Basic PermissionsProtecting Users Legal Rights From Anti-Circumvention Law Conveying Non-Source Forms Conveying Verbatim CopiesPage Additional Terms Acceptance Not Required for Having Copies Automatic Licensing of Downstream RecipientsPatents Use with the GNU Affero General Public License GNU Lesser General Public License Disclaimer of WarrantyLimitation of Liability END of Terms and ConditionsPreamble Page AThe modified work must itself be a software library Page Page Page No Warranty No Event Shall the OpenSSL OpenSSL LicenseOriginal SSLeay License