Samsung SNB-3000(P) user manual To check the log information, To update the software

Page 56

setup screen

To check the log information

Select <system> - <log>.

The Log information list appears.

System log list : Shows the log information about the system changes along with time and IP address.

-System started: When the camera turns on

-User login: When the user logs in to the camera

-System reset: When the camera restarts

-Network is up: When accessing the network

-Network is down: When not accessing the network

-Video param. changed: When the video related parameters are changed

-System time changed: When the system time is changed

-Network configuration change: When the network related configurations are changed

-Alarm occurrence 1, 2: When an alarm is generated

-Intelligent Video Analysis occurrence: When an intelligent video analysis event is generated.

-FTP send error: When FTP transfer failed

-SMTP send error: When sending e-mail message through SMTP server fails.

M	 The maximum of 2000 logs can be recorded.
	If the log number is over 2000, the log in the bottom of the log list will be replaced with a new log.

To update the software

Select <system> - <software update>.

The Software update window appears.

How to update the software

1.From the software update window, click [Browse…].

The Open dialog appears.

2.Select an updatable file and click [Open].

3.From the software update window, click [Install].

The selected file will be unzipped with a start of the update.

It may take a several minutes to complete the update.

56_ setup screen

Image 56

Contents Network Camera Overview English Overview FCC Statement Important safety instructions Contents Web viewer Setup screen Appendix  CPU Pentium4 / 2.4GHz or higher Product FeaturesPrecautions Installation and Use Compatible Poe Switches What’s IncludedCompatible Ip Routers Lens OptionsAt a Glance Front SideSystem PowerRear Side GND Disconnect the power before proceeding Mounting the lensMounting the CS lens Mounting the C lensConnecting the Auto Iris Lens connector FocusingInserting/Removing an SD Memory Card Inserting an SD Memory CardWhat is a memory card? Slot when releasedMemory Card Information not included Removing an SD Memory CardContacts Lock Switch Memory Card UseMemory Card Components SdhcConnecting with Other Device Connecting to the monitorPower Supply Network ConnectionConnecting to Audio Input/Output MicrophoneLINE-IN LINE-OUT Speaker Pre-AmpAudio I/O Block Diagram Network3 4 Connecting to the I/O port boxAlarm I/O Wiring Diagram How to use the menu key You can configure the camera settings using the Web ViewerFactory Defaults  System Info  Profile Camera SET  Privacy ZoneIris Camera SetupCamera ID Motion DNRShutter SENS-UPDAY/NIGHT White BAL DAYNIGHT / NIGHTDAY If set to Any excessively bright area in a night scene will be maskedDigital Zoom DetailAGC Color SUP ReverseZone Setup SettingSelect Point You will see dots on the screenFactory Default OthersOSD Color You can set the font color of the user interfaceSignal LanguageYou can check the system information You can select a language to your preferenceNetwork connection and setup Download and upgrade with the latest S/W version availableNetwork connection and setup Select Status from the Settings menu of the IP RouterSetting the IP Router Connecting the Camera Directly to Local Area Networking Connecting to the camera from a local PC in the LANURL IP Address SetupButtons used in IP Installer Static IP Setup Manual Network SetupAuto Set Support this functionWill be adjusted according to the Http port value Auto Network Setup Http//192.168.1.20110000Dynamic IP Setup Dynamic IP Environment SetupPort Range Forward Port Mapping Setup Manual Port Range ForwardingConnecting to the camera from a shared local Connecting to the camera from a remote PC via the InternetAddress bar of the Internet browser Ex http//mfffe42.websamsung.netConnecting to the camera Using URLConnecting via URL If the Http port is other than Normally, you wouldTo check the Ddns address LoginAdministrator ID, admin, is fixed and can not be changed Installing ActiveX For Windows XP Service Pack 2 usersPopup setting as follows Current siteAUsing the Live Screen Backup To capture the snapshotClick on the scene to record To print out the screenshotTo record a video Web viewer Using ThE Sd SEARCh Viewer Screen Sd Search Viewer Screen layoutAccessing the Setup screen Default SetupTo configure the video & audio settings  Contrast Adjust the contrast fromTo configure the IP settings Differently with each other Click Basic User User setup window appears To set the user accountClick Basic Language When done, click Apply Selected language will be appliedTo set the display language To time PC time configuration settingsTo set the date/time Select system log Log information list appears To update the softwareTo check the log information To reset the system To set the HttpsOverlay Setup To Set IP FilteringTo set the text Form of https//CameraIPEvent Setup To set the event transfer functionProvider To test the FTP transfer Click TestSetup screen To setup the record To set an alarm imageTo set the alarm input To Set Intelligent Video Analysis Setup screen To set the scheduled transfer To set the Ddns Network SetupTo set the video transfer mode DAY Mode ALCLens Level Backlight Night Burst Bitrate Control CBRConstant Bitrate TerminologyCavlc English Specifications CS/C RAMDSP 4CIFSetup HTTPS, SSL, DhcpARP, DNS, DDNS, Vsip DdnsSDK NtscHttp API  Test Condition Mjpeg ResolutionCIF, Quality1, Frame rate1 Frame Rate NtscMPEG4 4CIF EstimationHPel264 4CIF MPEG4 VGA 264 VGA MPEG4 CIF 264 CIF Frame Rate PAL Kbps 16 FPS MPEG4 VGA Kbps 17 FPS MPEG4 CIF 264 CIF Problem Solution  Verify the settings in the following sequence NTP must be properly configuredAlarm Video Transmission must be enabled Analysis settingGNU General Public License Preamble GPL S/W  Lgpl S/WProgram, and can be reasonably Page Page No Warranty GNU General Public License Terms and Conditions You must show them these terms so they know their rightsProtecting Users Legal Rights From Anti-Circumvention Law Source CodeBasic Permissions Conveying Verbatim Copies Conveying Non-Source FormsPage Additional Terms Patents Acceptance Not Required for Having CopiesAutomatic Licensing of Downstream Recipients Use with the GNU Affero General Public License Disclaimer of Warranty GNU Lesser General Public LicenseLimitation of Liability END of Terms and ConditionsPreamble Page AThe modified work must itself be a software library Page Page Page No Warranty OpenSSL License No Event Shall the OpenSSLOriginal SSLeay License