Samsung SNB-3000(P) user manual Accessing the Setup screen, Default Setup

Page 50

setup screen

Accessing the Setup screen

You can configure the default setting, system, overlay, event and network related settings, and change them as necessary.

1.In the Live screen, click the <Setup> tab.

2.The Setup screen appears.

Default Setup

To configure the video & audio settings

You can set the video resolution, quality,

CODEC and audio input/output settings.

1.Select <Basic> - <Video & Audio>. The Video & Audio setup screen appears.

Brightness : Adjust the screen brightness from 1 to 100.

Contrast : Adjust the contrast from

1to 100.

Resolution : Set the video size of the MPEG4, H.264, and MPEG files.

- NTSC : 4CIF(704x480), VGA(640X480), CIF(352X240)

- PAL : 4CIF(704x576), VGA(640X480), CIF(352X288)

Quality : Adjust the picture quality from 1 to 10.

Frame rate : Select one from 30 fps,

15fps, 8 fps, 3 fps, and 1 fps.

Bitrate control* : Select CBR (Constant Bit Rate) or VBR (Variable Bit Rate) for the compression method.

 If selecting VBR, you can not set the target bit rate.

50_ setup screen

Image 50

Contents Network Camera Overview English Overview FCC Statement Important safety instructions Contents Web viewer Setup screen Appendix  CPU Pentium4 / 2.4GHz or higher Product FeaturesPrecautions Installation and Use Compatible Ip Routers Compatible Poe SwitchesWhat’s Included Lens OptionsAt a Glance Front SideSystem PowerRear Side GND Mounting the CS lens Disconnect the power before proceedingMounting the lens Mounting the C lensInserting/Removing an SD Memory Card Connecting the Auto Iris Lens connectorFocusing Inserting an SD Memory CardMemory Card Information not included What is a memory card?Slot when released Removing an SD Memory CardMemory Card Components Contacts Lock SwitchMemory Card Use SdhcPower Supply Connecting with Other DeviceConnecting to the monitor Network ConnectionLINE-IN LINE-OUT Connecting to Audio Input/OutputMicrophone Speaker Pre-AmpAudio I/O Block Diagram Network3 4 Connecting to the I/O port boxAlarm I/O Wiring Diagram How to use the menu key You can configure the camera settings using the Web Viewer Camera SET Factory Defaults  System Info Profile  Privacy ZoneIris Camera SetupCamera ID Shutter MotionDNR SENS-UP DAYNIGHT / NIGHTDAY If set to DAY/NIGHTWhite BAL Any excessively bright area in a night scene will be maskedAGC Color SUP Digital ZoomDetail ReverseSelect Point Zone SetupSetting You will see dots on the screenOSD Color Factory DefaultOthers You can set the font color of the user interfaceYou can check the system information SignalLanguage You can select a language to your preferenceNetwork connection and setup Download and upgrade with the latest S/W version availableNetwork connection and setup Select Status from the Settings menu of the IP RouterSetting the IP Router Connecting the Camera Directly to Local Area Networking Connecting to the camera from a local PC in the LANURL IP Address SetupButtons used in IP Installer Auto Set Static IP SetupManual Network Setup Support this functionWill be adjusted according to the Http port value Auto Network Setup Http//192.168.1.20110000Dynamic IP Setup Dynamic IP Environment SetupPort Range Forward Port Mapping Setup Manual Port Range ForwardingAddress bar of the Internet browser Connecting to the camera from a shared localConnecting to the camera from a remote PC via the Internet Ex http//mfffe42.websamsung.netConnecting via URL If the Http port is other than Connecting to the cameraUsing URL Normally, you wouldTo check the Ddns address LoginAdministrator ID, admin, is fixed and can not be changed Popup setting as follows Installing ActiveXFor Windows XP Service Pack 2 users Current siteAUsing the Live Screen Backup To capture the snapshotClick on the scene to record To print out the screenshotTo record a video Web viewer Using ThE Sd SEARCh Viewer Screen Sd Search Viewer Screen layoutTo configure the video & audio settings Accessing the Setup screenDefault Setup  Contrast Adjust the contrast fromTo configure the IP settings Differently with each other Click Basic User User setup window appears To set the user accountClick Basic Language When done, click Apply Selected language will be appliedTo set the display language To time PC time configuration settingsTo set the date/time Select system log Log information list appears To update the softwareTo check the log information To reset the system To set the HttpsTo set the text Overlay SetupTo Set IP Filtering Form of https//CameraIPProvider Event SetupTo set the event transfer function To test the FTP transfer Click TestSetup screen To setup the record To set an alarm imageTo set the alarm input To Set Intelligent Video Analysis Setup screen To set the scheduled transfer To set the Ddns Network SetupTo set the video transfer mode Lens Level Backlight DAY ModeALC Night Burst Bitrate Control CBRConstant Bitrate TerminologyCavlc English Specifications DSP CS/CRAM 4CIFARP, DNS, DDNS, Vsip SetupHTTPS, SSL, Dhcp DdnsSDK NtscHttp API MPEG4 4CIF  Test Condition Mjpeg ResolutionCIF, Quality1, Frame rate1Frame Rate Ntsc EstimationHPel264 4CIF MPEG4 VGA 264 VGA MPEG4 CIF 264 CIF Frame Rate PAL Kbps 16 FPS MPEG4 VGA Kbps 17 FPS MPEG4 CIF 264 CIF Problem Solution Alarm Video Transmission must be enabled  Verify the settings in the following sequenceNTP must be properly configured Analysis setting GPL S/W GNU General Public LicensePreamble  Lgpl S/WProgram, and can be reasonably Page Page No Warranty GNU General Public License Terms and Conditions You must show them these terms so they know their rightsProtecting Users Legal Rights From Anti-Circumvention Law Source CodeBasic Permissions Conveying Verbatim Copies Conveying Non-Source FormsPage Additional Terms Patents Acceptance Not Required for Having CopiesAutomatic Licensing of Downstream Recipients Use with the GNU Affero General Public License Limitation of Liability Disclaimer of WarrantyGNU Lesser General Public License END of Terms and ConditionsPreamble Page AThe modified work must itself be a software library Page Page Page No Warranty OpenSSL License No Event Shall the OpenSSLOriginal SSLeay License