Cisco Systems Release 4.2 manual Host IP/Name Field

Chapter 3 Configuring VSM

Configuring VSM

Figure 3-12 Host IP/Name Field

g.Click the Submit button to add the server.

h.Repeat this Step 3 for each server on which you will run VSMS.

Step 4 If you will use VSVM, take the following actions to configure the server that will run VSVM:

a.Click Servers under Devices in the left panel of the VSOM Operator page, as shown in Figure 3-7 on page 3-7.

The Servers area appears.

b.In the Servers area, click Add a New Server, as shown in Figure 3-8 on page 3-8.

c.In the Server Information area in the Details tab, choose Video Surveillance Virtual Matrix (VSVM) from the Server Type drop-down list, as shown in Figure 3-13.

	Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
3-10	OL-19733-01