Cisco Systems Release 4.2 manual Attaching Inner Rack Rails

Page 29

Chapter 2 Setting Up and Configuring the Multi Services Platform

Mounting the Multi Services Platform in a Rack

Figure 2-1 Attaching Inner Rack Rails

a.Place the inner rack rail on one side of the chassis, aligning the hooks of the chassis with the holes in the rail.

The rail marked R attaches to the right of the chassis as you face the front of the chassis. The rail marked L attaches to the left. The wheels on the rails should face away from the chassis and the locking tabs on the rails should face the bottom of the chassis.

b.Slide the rail toward to front of the chassis.

c.Secure the rail to the chassis with four 1/2 inch (6.35 mm) screws (provided).

d.Repeat this step for the other inner rack rail.

Step 2 Attach the outer rack rails to the Multi Services Platform.

There are two outer rack rails. One attaches to each side of the rack and each connects to an inner rack rail to hold the Multi Services Platform in place. Each outer rack rail consists of two brackets. The brackets allow the rails to extend between 30 inches and 33 inches so that they can fit racks of various sizes. To attach these rails, see Figure 2-2and perform the actions that follow.

		Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2

	OL-19733-01			2-7
	OL-19733-01			2-7

Image 29

Contents Release 4.2/6.2 Page N T E N T S Configuring Archives Where to Go from Here Organization OverviewPreface Overview How to Use this ManualActivity Reference Planning for Your InstallationDescription Items Required for InstallationVsms Vsvm Vsom Information Required for Configuring VSM Configuration Task Required Information Introducing the Cisco Video Surveillance System Component and Reference Description Provided By Cisco VSMCisco Multi Services Platform Client PCs CamerasVideo Encoders 264 Mixed Deployment ScenariosSingle Site Deployment Single Site Deployment with One Multi Services PlatformMultiple Site Deployment with Centralized VSM Management Multiple Site Deployment-Centralized VSM Management Multiple Site Deployment-Distributed VSM Management OL-19733-01 Setting Up and Configuring the Multi Services PlatformUnpacking the Multi Services Platform Procedure Preparing to Rack Mount Mounting the Multi Services Platform in a RackRack Precautions Rack Mounting Attaching Inner Rack Rails Outer Rack Rails Placing the Server in a rack Installing Hard Drives Connecting to Power, the Network, and External Devices Powering On the System and Accessing the YaST Control Center Setting Up and Configuring the Multi Services Platform YaST Control Center window appears, as shown in Figure YaST Control Center Window Configuring Network SettingsYaST2 window appears, as shown in Figure YaST2 Window Choosing a Network Card 10 Network Address Setup Area 11 Hostname and Name Server Configuration Area Setting the System Time Clock and Time Zone area appears, as shown in Figure 13 Clock and Time Zone Area 15 Change System Date and Time Window Configuring NTPTo configure NTP, follow these steps 17 Advanced NTP Configuration Area New Synchronization area appears, as shown in Figure Check the Use for Initial Synchronization check box Where to Go from Here OL-19733-01 Setting the Vsom Log In Page as the Default Web Configuring VSMManagement Console Icon Choosing Operations Manager Choosing the Vsom Default Home Configuring VSMAccessing Video Surveillance Operations Manager Vsom Operator Adding ServersAccessing the Servers Area Choosing to Add a Server 10 Server Name Field 12 Host IP/Name Field 13 Choosing a Vsvm Server Type Adding Video EncodersProcedure 15 Accessing the Encoders Area 17 Choosing an Encoder Type 18 Encoder Name Field 20 Host IP/Name Field Adding Analog Cameras 22 New Password FieldAnalog Camera area appears 26 Choosing to Add an Analog Camera Status Enabled 30 Encoder Drop-Down List 32 Server Drop-Down List 34 Format Drop-Down List 36 Transport Option 38 Frame Rate Drop-Down List Adding IP Cameras 41 Accessing the IP/Network Cameras Area 42 Choosing to Add an IP/Network Camera 45 Camera Type Drop-Down List 46 Host IP-Name Field 48 Server Drop-Down List 50 Format Drop-Down List 52 Transport Option 54 Frame Rate Drop-Down List 56 Camera Requires Authentication Check Box Confirm Password field see -59, reenter the password Administration area appears Configuring Archives61 Choosing Archives 62 Choosing to Schedule a New Archive 64 Archive Name Field 66 Status Drop-Down List 67 Force Start Drop-Down List 69 Options for Configuring One or More Recording Periods Configuring VSM 70 Options for Configuring a Weekly Recording Schedule Configuring VSM Where to Go from Here 73 Displaying Configured Cameras OL-19733-01

Related manuals

Manual 182 pages 26.1 Kb

Manual 40 pages 55.56 Kb