Cisco Systems Release 4.2 manual Procedure

Page 25

Chapter 2 Setting Up and Configuring the Multi Services Platform

Unpacking the Multi Services Platform

•2 RU model—Ships in two boxes. One box contains the chassis and one box contains from 4 to 12 hard drives.

•4 RU model—Ships in two or three boxes. One box contains the chassis. If you ordered up to 12 hard drives, they are included in one additional box. If you ordered more than 12 hard drives, they are included in two additional boxes.

To unpack the Multi Services Platform, follow these steps:

Procedure

Step 1 If your shipment includes two or three boxes, make sure that the serial number that is printed on the shipping label on each box is the same.

Caution If the serial numbers are not identical, contact Cisco or your Cisco partner before you set up the system. Operating a Multi Services Platform with mismatched components causes the system to rebuild the disk array and prevents the system from operating.

Step 2 Carefully open each shipping box and remove its contents.

Step 3 Make sure that the box in which the chassis shipped includes these items:

•Rail assemblies for rack mounting

•SUSE license and activation packet

•Regulatory Compliance and Safety Information document

•Envelope that contains the following:

–Getting Started with Cisco Video Surveillance Manager Products

–Recovery disk

–End User License and Warranty Information disk

–One or two power cables (depending on how many power supplies you ordered for your server).

–Screws and washers for rack mounting

		Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2

	OL-19733-01			2-3
	OL-19733-01			2-3

Image 25

Contents Release 4.2/6.2 Page N T E N T S Configuring Archives Where to Go from Here Organization OverviewPreface Overview How to Use this ManualActivity Reference Planning for Your InstallationDescription Items Required for InstallationVsms Vsvm Vsom Information Required for Configuring VSM Configuration Task Required Information Introducing the Cisco Video Surveillance System Component and Reference Description Provided By Cisco VSMCisco Multi Services Platform Video Encoders CamerasClient PCs 264 Mixed Deployment ScenariosSingle Site Deployment Single Site Deployment with One Multi Services PlatformMultiple Site Deployment with Centralized VSM Management Multiple Site Deployment-Centralized VSM Management Multiple Site Deployment-Distributed VSM Management OL-19733-01 Setting Up and Configuring the Multi Services PlatformUnpacking the Multi Services Platform Procedure Preparing to Rack Mount Mounting the Multi Services Platform in a RackRack Precautions Rack Mounting Attaching Inner Rack Rails Outer Rack Rails Placing the Server in a rack Installing Hard Drives Connecting to Power, the Network, and External Devices Powering On the System and Accessing the YaST Control Center Setting Up and Configuring the Multi Services Platform YaST Control Center window appears, as shown in Figure YaST Control Center Window Configuring Network SettingsYaST2 window appears, as shown in Figure YaST2 Window Choosing a Network Card 10 Network Address Setup Area 11 Hostname and Name Server Configuration Area Setting the System Time Clock and Time Zone area appears, as shown in Figure 13 Clock and Time Zone Area 15 Change System Date and Time Window Configuring NTPTo configure NTP, follow these steps 17 Advanced NTP Configuration Area New Synchronization area appears, as shown in Figure Check the Use for Initial Synchronization check box Where to Go from Here OL-19733-01 Setting the Vsom Log In Page as the Default Web Configuring VSMManagement Console Icon Choosing Operations Manager Choosing the Vsom Default Home Configuring VSMAccessing Video Surveillance Operations Manager Vsom Operator Adding ServersAccessing the Servers Area Choosing to Add a Server 10 Server Name Field 12 Host IP/Name Field 13 Choosing a Vsvm Server Type Adding Video EncodersProcedure 15 Accessing the Encoders Area 17 Choosing an Encoder Type 18 Encoder Name Field 20 Host IP/Name Field Adding Analog Cameras 22 New Password FieldAnalog Camera area appears 26 Choosing to Add an Analog Camera Status Enabled 30 Encoder Drop-Down List 32 Server Drop-Down List 34 Format Drop-Down List 36 Transport Option 38 Frame Rate Drop-Down List Adding IP Cameras 41 Accessing the IP/Network Cameras Area 42 Choosing to Add an IP/Network Camera 45 Camera Type Drop-Down List 46 Host IP-Name Field 48 Server Drop-Down List 50 Format Drop-Down List 52 Transport Option 54 Frame Rate Drop-Down List 56 Camera Requires Authentication Check Box Confirm Password field see -59, reenter the password Administration area appears Configuring Archives61 Choosing Archives 62 Choosing to Schedule a New Archive 64 Archive Name Field 66 Status Drop-Down List 67 Force Start Drop-Down List 69 Options for Configuring One or More Recording Periods Configuring VSM 70 Options for Configuring a Weekly Recording Schedule Configuring VSM Where to Go from Here 73 Displaying Configured Cameras OL-19733-01

Related manuals

Manual 182 pages 26.1 Kb

Manual 40 pages 55.56 Kb