Cisco Systems Release 4.2 manual Adding Analog Cameras, New Password Field

Chapter 3 Configuring VSM

Configuring VSM

Figure 3-22 New Password Field

c.In the Confirm Password field (see Figure 3-23), reenter the password.

Figure 3-23 Confirm Password Field

Step 7 Click the Submit button to add the encoder.

Step 8 Repeat Step 4 through Step 7 as needed to add other video encoders.

Adding Analog Cameras

Adding analog cameras is the process of configuring information about the analog cameras that will operate in your VSM deployment. This information includes the name of each camera and information about its video stream.

Before you can add analog cameras, you must configure video encoders as described in the “Adding Video Encoders” section on page 3-11. If you will not use analog cameras, skip this section.

	Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01		3-17