
Chapter 3 Configuring VSM
Configuring VSM
Figure | Quality Slider |
Step 7 Click the Submit button to add the analog camera.
Step 8 Repeat Step 4 through Step 7 as needed to add other cameras.
Adding IP Cameras
Adding IP cameras is the process of configuring information about the IP cameras that will operate in your VSM deployment. This information includes the name of the camera, information about its video stream, and its log in credentials.
IP cameras (also called network cameras) connect directly to an IP network and do not require separate encoders.
If you will not use IP cameras, skip this section.
Procedure
Step 1 Access the VSOM Operations Manager as described in the “Accessing Video Surveillance Operations Manager” section on page
| Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2 |
|