Cisco Systems Release 4.2 manual Camera Requires Authentication Check Box

Chapter 3 Configuring VSM

Configuring VSM

Figure 3-55 Quality Slider

Step 7 In the Camera requires authentication area in the Camera Type tab, take these actions:

a.Check the Camera requires authentication check box (see Figure 3-56) if the camera allows access from VSMS only if VSMS provides valid authentication credentials.

Figure 3-56 Camera Requires Authentication Check Box

b.In the Username field (see Figure 3-57), enter the user name that VSMS provides when accessing the camera.

The user name is configured on the camera and the value that you enter in this field must match the configured name exactly. The user name can contain alphabetic and numeric characters only and is case sensitive.

	Cisco Video Surveillance Manager Getting Started Guide, Release 4.2/6.2
OL-19733-01		3-35