Cisco Systems 3120 manual Onboard Administrator Interconnect Bay Summary Window

Chapter 2 Switch Installation

Using the Onboard Administrator to Assign an IP Address to the Switch Module and Running Express Setup

Figure 2-5 Onboard Administrator Interconnect Bay Summary Window

Step 6 Click the IP address hyperlink for the switch module from the Management URL column to open a new browser window.

Step 7 On the left side of the Onboard Administrator, choose Configuration > Express Setup.

The Express Setup page appears (see Figure 2-6). (Close or minimize the Device Manager Help window.)

Figure 2-6 Express Setup Page

Step 8 Go to “Using Express Setup” section on page 2-11to finish setting up the switch module.

	Cisco Catalyst Blade Switch 3120 for HP Hardware Installation Guide
2-10	OL-12246-01