Samsung SHR-5082, SHR-5162 user manual Setting Audio ON/OFF, Selecting live screen mode

Page 21

Full Screen (Single) mode:

Displays the selected channel in full screen.

4, 6, 7, 8, and 9 Split mode:

Displays 4, 6, 7, 8, 9 channels in each split screen. You can select channel numbers on your own using the MODE button on the front panel or remote control. In 4-channel and

9-channel split modes, the screen page is changed using the Direction buttons.

16 Split mode:

Displays 16 live channels on a 16-split screen. The Auto Sequence is not available.

PIP (Picture in picture) mode:

Displays a small screen on a full screen. You can change the channel number on a full screen or small screen by pressing the ENTER button and inputting the NUMERIC button. To switch between main and sub screens, press the ENTER button and press the LEFT or RIGHT direction button. You can move the sub screen to 5 different stages using the UP/DOWN direction buttons.

Auto Sequence mode:

Sequentially displays all the channels at an interval of auto sequence time. The auto sequence time is set in Camera Configuration on the menu.

Selecting live screen mode

Available modes are switched using the MODE button and the NUMERIC buttons on the front panel or remote control. The following figure is the live modes transition diagram in the SHR-5162 model.

The initial live screen shows the 16-split screen mode at first. The SHR-5082 model starts from the 9-split mode.

In the 9-split screen mode, the first screen shows 9 channels (CH 1 to CH 9) and the second screen shows the rest 7 channels (CH 10 to CH 16) after pressing the RIGHT direction button. If you press the RIGHT direction button again, it changes to the Auto Sequence mode.

Likewise, in the 4-split screen mode, the first screen shows 4 channels (CH 1 to CH 4), the second screen shows CH 5 to CH 8, the third screen shows CH 9 to CH 12, the fourth screen shows CH 13 to CH 16. If you press the RIGHT direction button again, it changes to the Auto Sequence mode.

Every time you press the MODE button, the modes change in the following sequence:

16-split mode 9-split mode 4-split mode 6-split mode 7-split mode 8-split mode PIP mode Auto Sequence mode 16-split mode.

Press the CH 1 to CH 16 button to see a full screen of each channel after pressing the ENTER button.

Press the MODE button after entering a full screen channel in a split screen mode to return to the previous split mode screen.

SETTING AUDIO ON/OFF

In other split modes except full screen mode, 16-split mode, and auto sequence mode, you can choose a channel to be displayed by pressing the ENTER and NUMERIC buttons. If you set the selected channel to Audio On, you can turn the Audio On and Off in live mode.

Audio On/Off setting in full screen mode

In full screen mode, the audio of the selected channel automatically turns on. You can turn the audio On and Off by toggling the AUDIO button. Depending on the audio On/Off setting condition, the Audio icon of the channel changes to yellow and white.

Audio On/Off setting in 16-split mode

When pressing the ENTER button in the 16-split mode, the selection cursor appears for you to select a channel. When you select a channel and press the AUDIO button on the front panel or remote control, the audio of the selected channel is changed to On or Off.

Depending on the audio On/Off setting condition, the Audio icon of the selected channel changes to yellow and white. You can have audio settings on channel 1 to 4 in 16-split mode.

live _17

04 LIVE

SHR-5162_Eng.indb 17

2007-06-18 ｿﾀﾀ・11:48:04

 

 

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Real Time DVR WHAT’S Included with Your DVR Key features of your DVRSafety regulations Operating Temperature BatteryBefore start Standards ApprovalsContents Search and Play Controls on the DVR Introducing your real time DVRFast/Step Rewind Button Power LEDStop Button PLAY/PAUSE ButtonRear Rear Panel JacksPress the 1 to 9 button respectively Remote ControlRelease, and wait 3 seconds FR fast rewind FR fast reverse Used forChanging the Remote Control ID Installation Checking Installation EnvironmentHDD Addition Setting the jumper Things to consider when adding a hard diskHow to add hard disks SlaveScrewdriver Bracket Hddb HddaBRACKET-HDDB Connecting VIDEO, AUDIO, and Monitor Connecting the Network Connecting with other devicesConnecting to Internet through Ethernet 10/100BaseT Illustrations are described based on SHR-5162Connecting the Alarm INPUT/OUTPUT Connecting the USBConnecting to Internet through Adsl  5082 Alarm IN/OUT Ports  5162 Alarm IN/OUT PortsConnecting the RS-485 Device Live Live Screen ModeOperating the System Live screen iconsLive screen modes Selecting live screen mode Setting Audio ON/OFFAudio On/Off setting in full screen mode Audio On/Off setting in 16-split modeEvent Monitoring Freezing and ZoomingFreeze function Zoom functionSPOT-OUT Monitoring Fan Information Error occurs in the fan Refer to the manualDate/Time/Language Setup Menu setupBefore USE SystemPassword Load Factory Default System LogEvent Log Storage Setup System Information and SetupRemote Control Device Export/Import the ConfigurationCamera Camera ConfigurationScreen Setup MonitoringPTZ Device Record Quality & Auto Deletion Record ModeEvent Record Duration Record Rate & Video SizeEvent Record Mode Alarm Detection SetupMotion Detection Setup Video Loss Detection Setup ScheduleRecord Schedule Alarm Out Schedule IP SettingsNetwork Transfer Protocol Settings Transfer Picture Settings Callback SettingsCallback Settings Transfer Picture SettingsPort configuration for connecting Smart Viewer Configuring Network Poor image problem in Smart Viewer Case of TCP transfer protocolBackup To configure the related settingsBackup PTZ Camera Control Mode PTZ camera controlBasic PTZ Operations Preset Setup Camera Menu SetupTo set a preset Other View Preset ViewSamsung PanRecording REC Normal RecordingRecord Schedule Calendar Search Search and playEvent Search To perform a calendar searchGO to First Search Date Time SearchTo perform an event search To perform a date/time searchBackup Search Can Select Backup SearchGO to Last Search Playback Speed play  Playback mode Viewing still images  Audio playbackPC Specification Recommended Main FeaturesSmart Viewer IntroductionExecution Setup Mode This button is used for connecting to CallbackThis screen shows the monitoring sites  Setup Item Selection buttons DVR Setup Save/Cancellation of Revised Information  Closing the setup windowUser Password For more details, see , Menu Setup Admin Password Camera Camera Configuration Only English is available for the title Retype it Recording  Monitoring Setup Schedule Network Password  For the network password, you can Network Viewer Setup Site Setup You can set the language to be displayed on Smart Viewer DVR List If you really want to modify the DVR, disconnect Smart Viewer, the following message appearsDVR and retry to modify it  Site ListVersion To edit the DVR, go to the DVR listTo add a DVR to the site, select a DVR and click Add Password certification failure Monitoring ModeConnection Failure Cases Upgrading the DVR softwareConnection Screen Mode Conversion ButtonTime Information Connection Information Time Change When the date and time of the DVR are changed Event Log Display WindowClick Log to activate the log display window  Black When Smart Viewer cannot be connected to a DVR Sequence Mode ButtonCamera Connection Indication Window Screen Split Selection ButtonsCallback Button Next ButtonFavorite Button Video Recording ButtonAudio Volume Control Button Video Brightness/Contrast Control ButtonPTZ Camera Control Buttons  The other cameras do not support those functions Self Menu Setup of PTZ deviceSearch Mode Audio Volume, Video Brightness/ Contrast Buttons Remote ModeVideo Save Backup/Video Conversion/Print/Setup Calendar WindowViewer Setup File Converting AVI Location Print button Viewer Setup File Converting Jpeg LocationSetup Mode button File Conversion buttonTime Line Local ModeReload button It renews the recording time informationAppendix Product SpecificationTrue Recording ips 0.938/1.875/3.75/7.5/15/30ips Video MPEG4True Recording ips 0.781/1.563/3.125/6.25/12.5/25i 15ipsNTSC/12.5ipsPAL 5ipsNTSC/6.2ipsPALTriplex 16 split  15 Channel Live +1Channel PB  5082 Outline Drawings Outline Drawings 5162 Outline Drawings Classification Detailed Items Factory Setup Factory DefaultCH1 On / Off RetryOff Troubleshooting FAQ  If you forget the password, you shall reset the DVR to If all your efforts as above end up with nothing, check Works for the shop where you bought the product DVR has problem. DVR will not work in order to protect When you use DHCP/ADSLPPPoE for connection  Check if 3 Smart Viewer users are in connection with Make sure that the external storage device installed is  Make sure that the additional external HDD installedPreamble Open Source License Report on the ProductAppendix No Warranty Repair or Correction How to Apply These Terms to Your New ProgramsWe protect your rights with a two-step method You must cause the whole of the work to SHR-5162Eng.indb 2007-06-18 ｿﾀﾀ・115043 Executable How to Apply These Terms to Your New Libraries FoundationLicense, or at your option any later version Loss of USE, DATA, or Profits or Business Interruption OpenSSL LicenseThis Software is Provided by Eric Young ‘‘AS IS’’
Related manuals
Manual 1 pages 37.83 Kb
Top Page Image Contents