Samsung SHR-5082, SHR-5162 Event Log Display Window, Click Log to activate the log display window

Page 63

3.When audio signal is available, the audio mark appears.

4.It displays whether the PTZ controls are active.

5.The current channel alarm status is displayed.

6.The name and IP address of the connected DVR are displayed.

Clicking the speaker icon changes the audio On and Off.

: Audio Off : Audio On

When the audio function is disabled, the following icon is displayed.

: Audio Disabled

When the alarm or motion is detected, its status is displayed on the screen in real time with the corresponding icon.

: Motion Detection : Alarm Event

If you have set PTZ cameras for the DVR, the PTZ icon is displayed on the screen. Select a PTZ camera channel and use the PTZ buttons for control. (For more information, refer to Chapter 5, “PTZ Camera Control.”)

Event Log Display Window

Click Log to activate the log display window.

It displays the events such as alarms, connection events, and setup change events in real time.

The displayed events are:

Connecting..: When trying to connect to a DVR is in progress.

Connected..: When connection is made to a DVR.

Connection Failed: When connection to a DVR fails.

Disconnected..: When the DVR is disconnected.

Setup (Remote): When any DVR settings are changed by Smart Viewer.

Setup Start/End (Local): When the Menu Setup window for the DVR is started or ended.

Video Loss CH[N]: When a video loss in a channel is detected.

Time Change: When the date and time of the DVR are changed.

Load Factory Default: When the DVR system is initialized.

Network Change: When the DVR network setup is changed.

System Shutdown: When the DVR system is terminated.

HDD Format: When the HDD formatting is initialized.

Disk Full: When there is no more space in the HDD of DVR.

Power Failure Recovery: When the DVR resumes after power failure.

Backup Start/End/Fail/Stop: Backup for the DVR is started, finished, failed, or stopped.

Network Traffic Busy: Data transport through the network is not smoothly going.

Access Denied (Limit Over): No more access is allowed because the connection limit is over.

When specific events such as CAUTION time change, load factory default,

network change, system shutdown, or HDD format are detected, Smart Viewer automatically terminates the connection.

Smart Viewer _59

10 Smart Viewer

SHR-5162_Eng.indb 59

2007-06-18 ソタタ・11:50:04

 

 

Image 63
Contents Real Time DVR WHAT’S Included with Your DVR Key features of your DVRSafety regulations Standards Approvals BatteryOperating Temperature Before startContents Search and Play Controls on the DVR Introducing your real time DVRPLAY/PAUSE Button Power LEDFast/Step Rewind Button Stop ButtonRear Rear Panel JacksFR fast rewind FR fast reverse Used for Remote ControlPress the 1 to 9 button respectively Release, and wait 3 secondsChanging the Remote Control ID Installation Checking Installation EnvironmentHDD Addition Slave Things to consider when adding a hard diskSetting the jumper How to add hard disksScrewdriver Bracket Hddb HddaBRACKET-HDDB Illustrations are described based on SHR-5162 Connecting with other devicesConnecting VIDEO, AUDIO, and Monitor Connecting the Network Connecting to Internet through Ethernet 10/100BaseT 5082 Alarm IN/OUT Ports  5162 Alarm IN/OUT Ports Connecting the USBConnecting the Alarm INPUT/OUTPUT Connecting to Internet through AdslConnecting the RS-485 Device Live screen icons Live Screen ModeLive Operating the SystemLive screen modes Audio On/Off setting in 16-split mode Setting Audio ON/OFFSelecting live screen mode Audio On/Off setting in full screen modeZoom function Freezing and ZoomingEvent Monitoring Freeze functionSPOT-OUT Monitoring Fan Information Error occurs in the fan Refer to the manualSystem Menu setupDate/Time/Language Setup Before USEPassword Load Factory Default System LogEvent Log Storage Setup System Information and SetupRemote Control Device Export/Import the ConfigurationCamera Camera ConfigurationScreen Setup MonitoringPTZ Device Record Quality & Auto Deletion Record ModeEvent Record Duration Record Rate & Video SizeEvent Record Mode Alarm Detection SetupMotion Detection Setup Video Loss Detection Setup ScheduleRecord Schedule Alarm Out Schedule IP SettingsNetwork Transfer Protocol Settings Transfer Picture Settings Callback SettingsTransfer Picture Settings Callback SettingsCase of TCP transfer protocol Configuring NetworkPort configuration for connecting Smart Viewer  Poor image problem in Smart ViewerBackup To configure the related settingsBackup PTZ Camera Control Mode PTZ camera controlBasic PTZ Operations Preset Setup Camera Menu SetupTo set a preset Pan Preset ViewOther View SamsungRecording REC Normal RecordingRecord Schedule To perform a calendar search Search and playCalendar Search Event SearchTo perform a date/time search Date Time SearchGO to First Search To perform an event searchPlayback Backup SearchBackup Search Can Select GO to Last Search Audio playback  Playback mode Speed play  Viewing still imagesIntroduction Main FeaturesPC Specification Recommended Smart ViewerExecution Setup Mode This button is used for connecting to CallbackThis screen shows the monitoring sites  Closing the setup window DVR Setup Setup Item Selection buttons  Save/Cancellation of Revised InformationUser Password For more details, see , Menu Setup Admin PasswordRetype it Camera Configuration Camera  Only English is available for the title Recording  Monitoring Setup Schedule Network Password  For the network password, you can Network Viewer Setup Site Setup You can set the language to be displayed on Smart Viewer DVR List  Site List Smart Viewer, the following message appearsIf you really want to modify the DVR, disconnect DVR and retry to modify itVersion To edit the DVR, go to the DVR listTo add a DVR to the site, select a DVR and click Add Upgrading the DVR software Monitoring ModePassword certification failure Connection Failure CasesConnection Information Mode Conversion ButtonConnection Screen Time Information Time Change When the date and time of the DVR are changed Event Log Display WindowClick Log to activate the log display window Screen Split Selection Buttons Sequence Mode Button Black When Smart Viewer cannot be connected to a DVR Camera Connection Indication WindowVideo Recording Button Next ButtonCallback Button Favorite ButtonAudio Volume Control Button Video Brightness/Contrast Control ButtonPTZ Camera Control Buttons  The other cameras do not support those functions Self Menu Setup of PTZ deviceSearch Mode Calendar Window Remote ModeAudio Volume, Video Brightness/ Contrast Buttons Video Save Backup/Video Conversion/Print/SetupFile Conversion button Viewer Setup File Converting Jpeg LocationViewer Setup File Converting AVI Location Print button Setup Mode buttonIt renews the recording time information Local ModeTime Line Reload buttonAppendix Product Specification15ipsNTSC/12.5ipsPAL 5ipsNTSC/6.2ipsPAL Video MPEG4True Recording ips 0.938/1.875/3.75/7.5/15/30ips True Recording ips 0.781/1.563/3.125/6.25/12.5/25iTriplex 16 split  15 Channel Live +1Channel PB  5082 Outline Drawings Outline Drawings 5162 Outline Drawings Classification Detailed Items Factory Setup Factory DefaultCH1 On / Off RetryOff Troubleshooting FAQ  If you forget the password, you shall reset the DVR to If all your efforts as above end up with nothing, check  Check if 3 Smart Viewer users are in connection with DVR has problem. DVR will not work in order to protectWorks for the shop where you bought the product  When you use DHCP/ADSLPPPoE for connection Make sure that the external storage device installed is  Make sure that the additional external HDD installedPreamble Open Source License Report on the ProductAppendix No Warranty Repair or Correction How to Apply These Terms to Your New ProgramsWe protect your rights with a two-step method You must cause the whole of the work to SHR-5162Eng.indb 2007-06-18 ソタタ・115043 Executable How to Apply These Terms to Your New Libraries FoundationLicense, or at your option any later version Loss of USE, DATA, or Profits or Business Interruption OpenSSL LicenseThis Software is Provided by Eric Young ‘‘AS IS’’
Related manuals
Manual 1 pages 37.83 Kb