Samsung SHR-5162, SHR-5082 user manual Transfer Protocol Settings

Page 36

IP

Set the IP address for the main body of the product for connecting to the network. If the connection mode is set to Static IP, type the IP address. If the connection mode is Dynamic IP or ADSL(PPPoE), the IP address allocated by the DHCP server or ADSL company automatically appears. In case of DHCP or ADSL connection failure, the value “000.000.000.000” is displayed. Then, press OK to retry connection for getting the IP address. If the connection failure continues, turn off the power for a while and reboot the system for retry.

Gateway

In case of Static IP, set the gateway address assigned. With Dynamic IP or ADSL, the address is automatically allocated.

Subnet Mask

Set the subnet mask address assigned.

DNS

Set the DNS address. The default value is “168.126.63.1.” If you have hard time to connect to the network when you are using DHCP or ADSL, contact the network manager or ADSL company personnel to set up a new DNS address.

ADSL User ID

If the product is connected to the ADSL network, input the user ID subscribed to the ADSL company. You can input the user ID using the virtual keyboard up to 40 letters irrespective of alphabets, numbers, and symbols.

Password

If the product is connected to the ADSL network, input the user password subscribed to the ADSL company. You can input the password using the virtual keyboard up to 40 letters irrespective of alphabets, numbers, and symbols.

In case of ADSL, the audio is not CAUTION played on Smart Viewer. Be sure to set the IP, port, Subnet mask,

gateway, and DNS to make Smart Viewer connected to the product. Wrong settings may result in not being connected to the product. Please contact the network manager or ADSL company personnel to get the correct setting values.

Transfer Protocol Settings

You have to configure the data transfer protocol related settings to use network for transferring data.

32_ menu setup

Transfer Protocol Settings

Protocol Type

UDP

 

Port(TCP)

554.555.556.557

 

Port(UDP)

8000-8159

 

Unicast/Multicast

Unicast

 

Multicast IP

224.126.063.001

 

TTL

005

 

DDNS Site

Off

 

Host Name

 

 

User Name

 

 

User Password



 

 

OK

Cancel

Protocol type.

Select any of TCP and UDP. If you have selected ADSL in IP Setup, only TCP is available. In this case, audio transmission is not available.

Port(TCP)

Select a number ranging from 554 to 998 using the UP/DOWN direction buttons and the port number will change by 4. Once the first port number is determined, the following 3 numbers will change.

Port(UDP)

Select a number ranging from 8000 to 9760 using the UP/DOWN direction buttons and the port number will change by 160. Once the first number is determined, the following number will change.

Unicast/Multicast

Select any of Unicast and Multicast. Unicast is set by default. When you select Multicast, the multicast IP is activated and you can input the address ranging from 224.0.0.0 to 239.255.255.255 using the UP/DOWN direction buttons.

TTL

Enter a number ranging from 0 to 255. You can input it only when Multicast is selected. The default value is “5.”

DDNS Site

Select a DDNS site. This DDNS setup is necessary to see the monitoring screens from the remote computer that is running Smart Viewer. Available values are Off, Samsung DDNS, dyndns.com, no-ip.com, and changeip. com. If you select Off, the IP will not be registered in DDNS.

-If you select Samsung DDNS, register the TCP IP in DDNS that is operated by Samsung. To configure the DDNS-related settings in Smart Viewer, select Setup > Site Setup > DVR Registration and set the address type with MAC Address, and then register the MAC address that is displayed in the System Information and Setup menu. (or you can get the Ethernet address on the side label attached on the product.)

-Using the free public DDNS web sites such as dyndns.com, no-ip.com, and changeip. com, you can acquire an URL by registering a dynamic IP. After this action completes, enter the host name, user name, and password in this window.

SHR-5162_Eng.indb 32

2007-06-18 ｿﾀﾀ・11:48:32

 

 

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Real Time DVR Key features of your DVR WHAT’S Included with Your DVRSafety regulations Battery Operating TemperatureBefore start Standards ApprovalsContents Search and Play Introducing your real time DVR Controls on the DVRPower LED Fast/Step Rewind ButtonStop Button PLAY/PAUSE ButtonRear Panel Jacks RearRemote Control Press the 1 to 9 button respectivelyRelease, and wait 3 seconds FR fast rewind FR fast reverse Used forChanging the Remote Control ID Installation Checking Installation EnvironmentHDD Addition Things to consider when adding a hard disk Setting the jumperHow to add hard disks SlaveBracket Hddb Hdda ScrewdriverBRACKET-HDDB Connecting with other devices Connecting VIDEO, AUDIO, and Monitor Connecting the NetworkConnecting to Internet through Ethernet 10/100BaseT Illustrations are described based on SHR-5162Connecting the USB Connecting the Alarm INPUT/OUTPUTConnecting to Internet through Adsl  5082 Alarm IN/OUT Ports  5162 Alarm IN/OUT PortsConnecting the RS-485 Device Live Screen Mode LiveOperating the System Live screen iconsLive screen modes Setting Audio ON/OFF Selecting live screen modeAudio On/Off setting in full screen mode Audio On/Off setting in 16-split modeFreezing and Zooming Event MonitoringFreeze function Zoom functionFan Information Error occurs in the fan Refer to the manual SPOT-OUT MonitoringMenu setup Date/Time/Language SetupBefore USE SystemPassword Load Factory Default System LogEvent Log System Information and Setup Storage SetupExport/Import the Configuration Remote Control DeviceCamera Configuration CameraScreen Setup MonitoringPTZ Device Record Mode Record Quality & Auto DeletionRecord Rate & Video Size Event Record DurationEvent Record Mode Alarm Detection SetupMotion Detection Setup Video Loss Detection Setup ScheduleRecord Schedule Alarm Out Schedule IP SettingsNetwork Transfer Protocol Settings Callback Settings Transfer Picture SettingsCallback Settings Transfer Picture SettingsConfiguring Network Port configuration for connecting Smart Viewer Poor image problem in Smart Viewer Case of TCP transfer protocolBackup To configure the related settingsBackup PTZ Camera Control Mode PTZ camera controlBasic PTZ Operations Preset Setup Camera Menu SetupTo set a preset Preset View Other ViewSamsung PanRecording REC Normal RecordingRecord Schedule Search and play Calendar SearchEvent Search To perform a calendar searchDate Time Search GO to First SearchTo perform an event search To perform a date/time searchBackup Search Backup Search Can SelectGO to Last Search Playback Playback mode  Speed play Viewing still images  Audio playbackMain Features PC Specification RecommendedSmart Viewer IntroductionExecution Setup Mode This button is used for connecting to CallbackThis screen shows the monitoring sites DVR Setup  Setup Item Selection buttons Save/Cancellation of Revised Information  Closing the setup windowFor more details, see , Menu Setup Admin Password User PasswordCamera Configuration  Camera Only English is available for the title Retype it Monitoring Setup  Recording Schedule Network Password  For the network password, you can Network Viewer Setup Site Setup You can set the language to be displayed on Smart Viewer DVR List Smart Viewer, the following message appears If you really want to modify the DVR, disconnectDVR and retry to modify it  Site ListVersion To edit the DVR, go to the DVR listTo add a DVR to the site, select a DVR and click Add Monitoring Mode Password certification failureConnection Failure Cases Upgrading the DVR softwareMode Conversion Button Connection ScreenTime Information Connection Information Time Change When the date and time of the DVR are changed Event Log Display WindowClick Log to activate the log display window Sequence Mode Button  Black When Smart Viewer cannot be connected to a DVRCamera Connection Indication Window Screen Split Selection ButtonsNext Button Callback ButtonFavorite Button Video Recording ButtonAudio Volume Control Button Video Brightness/Contrast Control ButtonPTZ Camera Control Buttons Self Menu Setup of PTZ device  The other cameras do not support those functionsSearch Mode Remote Mode Audio Volume, Video Brightness/ Contrast ButtonsVideo Save Backup/Video Conversion/Print/Setup Calendar WindowViewer Setup File Converting Jpeg Location Viewer Setup File Converting AVI Location Print buttonSetup Mode button File Conversion buttonLocal Mode Time LineReload button It renews the recording time informationProduct Specification AppendixVideo MPEG4 True Recording ips 0.938/1.875/3.75/7.5/15/30ipsTrue Recording ips 0.781/1.563/3.125/6.25/12.5/25i 15ipsNTSC/12.5ipsPAL 5ipsNTSC/6.2ipsPALTriplex 16 split  15 Channel Live +1Channel PB Outline Drawings  5082 Outline Drawings 5162 Outline Drawings Factory Default Classification Detailed Items Factory SetupCH1 On / Off RetryOff Troubleshooting FAQ  If you forget the password, you shall reset the DVR to If all your efforts as above end up with nothing, check DVR has problem. DVR will not work in order to protect Works for the shop where you bought the product When you use DHCP/ADSLPPPoE for connection  Check if 3 Smart Viewer users are in connection with Make sure that the additional external HDD installed  Make sure that the external storage device installed isOpen Source License Report on the Product PreambleAppendix No Warranty How to Apply These Terms to Your New Programs Repair or CorrectionWe protect your rights with a two-step method You must cause the whole of the work to SHR-5162Eng.indb 2007-06-18 ｿﾀﾀ・115043 Executable How to Apply These Terms to Your New Libraries FoundationLicense, or at your option any later version OpenSSL License Loss of USE, DATA, or Profits or Business InterruptionThis Software is Provided by Eric Young ‘‘AS IS’’
Related manuals
Manual 1 pages 37.83 Kb
Top Page Image Contents