Samsung SDE3004 Updating the Software,  Using,  System Upgrade,  BroadcastS/W Upgrade

Page 37

•Updating the Software

1.Connect a device storing the software to be updated. (It may take about 10 seconds to recognize the device.)

Upgradeable devices include USB memory and network device.

To update the network, the current DVR should have been connected to the network.

Upgrade via the proxy server may not be enabled due to the restricted access.

2.Select <System Management> from <System> window.

3.Select <System Information>.

4.When the recognized device appears, select <Upgrade>.

System Management

System Information

Settings

•System Information

Software Version

v1.0xh_yymmddhhmmss

System Upgrade

MAC AddressCurrent Version 00:00:F0:54:FF:FFv1.0xh yymmddhhmmss

 

 

New Version

v1.0xh_yymmddhhmmss

 

• S/W Upgrade

want to upgrade?

 

 

 

 

Do you

 

 

Device

 

USB2FlashStorage

Upgrade

 

 

 

 

OK

Cancel

 

Version

V1.08_090731170402

 

Previous

USING

The <Upgrade> button will be activated only if the current <Software Version> of the <System Information> is same to or older than that of <S/W Upgrade>.

THE DVR

5.Press <OK> in the “System Upgrade” window.

While updating, it shows the progress.

•Updating progresses with 3 steps as shown in the figure.

System Management

System Information

Settings

•System Information

Software Version

v1.0xh_yymmddhhmmss

BroadcastS/W Upgrade

MAC Address

00:00:F0:54:FF:FF

 

 

Software upgrading...

 

 

• S/W Upgrade

 

 

Device

USB2FlashStorage

Upgrade

Version

V1.08_090731170402

 

Previous

6.When the updating is done, it automatically restarts. Do not turn the power off until it finishes restarting.

MIf “Upgrade Failed” appears, retry from the step 4.

When you experience continued failure, consult the service center for assistance.

System Management

System Information

Settings

•System Information

Software Version

v1.0xh_yymmddhhmmss

BroadcastS/W Upgrade

MAC Address

 

00:00:F0:54:FF:FF

 

 

 

 

 

Software upgradingSoftware...

upgrading...

 

 

 

 

 

 

 

• S/W Upgrade

Do not turn off during the upgrade.

 

Device

 

USB2FlashStorage

Upgrade

Version

 

 

V1.08_090731170402

 

Previous

English _37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents SDE-3004 Channel DVRChannel DVR  Overview Important Safety InstructionsOverview Before Start BatteryContents Using Search Viewer Using Live ViewerViewer Setup SEC Backup ViewerFeatures Standards Approvals Package ContentsPart Names and Functions Front Part Names and Functions Rear Using the Numeric buttons Remote ControlChanging the Remote Control ID Checking the Installation Environment InstallationConnecting the VIDEO, AUDIO, and Monitor  Connecting withConnecting the Camera Connecting the USBIR LED LensConnecting with DVR Installing the cameraCamera Bracket Specification  Connecting with Other DeviceConnect the camera cable to the camera Adjusting the Camera BracketConnecting to Network through Ethernet 10/100BaseT Connecting the NetworkConnecting to the Network using the router Internet Connecting to Internet through AdslStarting the system Getting StartedShutting Down the System  LiveLocking All Buttons LoginIcons on the Live Screen Live Screen ConfigurationLive Split Mode Menu Error InformationSplit Mode Menu Live Screen MenuSingle Mode Menu View the Launcher Menu Alarm FreezeSystem Date/Time/Language Time. Switching the screen mode Live ModeSwitching the screen automatically PIPSwitching to Single Mode Channel SettingSpot OUT Selecting a Spot Out modeZoom Multichannel Live MenuYou can turn the sound on/off the CH1 in Live mode Audio ON/OFF in Single modeAudio ON/OFF FreezeCH2 Setting the Date/Time/Language System SetupDate/Time/Language Using the Calendar Setting HolidayUsing Virtual Keyboard Setting the AdministratorAdmin Permission ManagementTo set the group authority Setting the GroupLogin To change the user passwordTo restrict the user permissions UserSetting Permissions Setting the UserWhen the user setup is done, press OK  Using the DVRChecking the System Information System ManagementSystem Management System Information System Upgrade  Using BroadcastS/W Upgrade Updating the SoftwareLog Information SettingsSystem Log Backup Log Backup LogEvent Log Use the up/down buttonsSetting the Camera Setting the DeviceCamera Press Enter buttonStorage Device When the camera setup is done, press OKConfirming Devices You can check information on storage devicesYou can format a storage device FormattingSelect Format FormattedRemote Devices HDD AlarmSetting Display position Setting the MonitorMonitor Setting the Screen Mode Setting the Spot OutRecording Schedule Setting the RecordingRecord Recording ScheduleSetting Standard Recording Properties REC Quality / ResolutionEvent Record Duration Recording Color TagsRecord Option Setting Event Recording PropertiesUsing the DVR Setting the EventMotion Detection Video Loss Detection Setting the Motion Detection AreaAlarm Schedule Setting the Backup BackupYou can backup the desired data to a connected device BackupConnection Mode Network ConfigurationSetting the Connection You can set the network connection route and protocolMove to Connection Mode, and press Enter Setting the ProtocolProtocol When no router is used Connecting and Setting the NetworkInternal Port Range Set the same to the External Port Range When a router is usedWhen the Ddns setup is done, press OK Ddns SettingLive Transfer Live TransferSmtp Setting Mailing ServiceEvent Setting Recipient Setting Group SettingWhen the recipient setting is done, press OK GroupAdd recipientSearch It does not appear in Backup SearchTime Search You can search for recorded data of a desired timeEvent Search Backup SearchSearch & Play Motion Search Motion SearchMotion Region Playback Backup RangePlay  For data search, refer to Search.REC Records all channels in Live mode Partial Backup Using the Playback ButtonMode Switch DVR setIntroducing WEB Viewer What is Web Viewer? WEB Viewer Click Install Connecting WEB ViewerUsing Live Viewer Single Mode You can change the split mode by clicking each number iconQuad Mode Full Screen ModeConnected DVR Setting the display of the OSD time informationCapture Saves the current screen into a BMP or Jpeg file Saving the Live Screen on the PCUsing Search Viewer SPLIT-SCREEN Saving the Live Screen on the PC Searching the Recorded Video in the Calendar You can configure the various settings of the DVR system Viewer SetupSystem Date/Time/LanguagePermission Management HolidaySystem Management Camera DeviceStorage Device Monitor Remote DeviceRecord For more information, refer to Setting the Recording.Recording Schedule Event Record DurationEvent REC Quality & ResolutionRecord Option Motion DetectionYou can set the alarm output time if a video loss occurs Alarm ScheduleVideo Loss Detection Motion Region Set the target motion detection areaYou can check the Ddns settings For more information, refer to Network Configuration.Network ConnectionSmtp Mailing ServiceKey Features What is Mobile Viewer?About Mobile ViewerRecommended System Requirements SEC Backup Viewer Backup Viewer Product Specification Camera 500GB Sata HDD Product Specification Appendix Hdmi Category Details Factory Default Default SettingManagement Duration Smtp Troubleshooting 4CIF 2CIFCIF GNU General Public License Open Source License Report on the ProductPreamble How to Apply These Terms to Your New Programs No WarrantyEND of Terms and Conditions Conveying Verbatim Copies Terms and ConditionsConveying Modified Source Versions Acceptance Not Required for Having Copies Limitation of Liability GNU Lesser General Public LicensePage OpenSSL License How to Apply These Terms to Your New LibrariesOriginal SSLeay License Page Correct disposal of batteries in this product Chertsey, Surrey, United Kingdom KT16 OPS Sales Network
Related manuals
Manual 8 pages 28.56 Kb

SDE-3004, SDE3004 specifications

The Samsung EZ View Kit, model SDE-3004, represents a significant advancement in the domain of camera surveillance systems. Designed for both home and small business use, this intuitive kit combines advanced features with user-friendly technology, ensuring critical security needs are met effectively.

One of the standout features of the SDE-3004 is its four-channel capability, allowing users to connect up to four cameras simultaneously. This flexibility ensures comprehensive coverage of key areas, enhancing the overall surveillance reach without requiring multiple monitoring systems. The kit includes four high-quality, weather-resistant cameras that provide clear video footage in various conditions, making it suitable for outdoor surveillance as well.

The SDE-3004 is equipped with advanced recording technology, offering both real-time and scheduled recording options. With the ability to record in high definition, users can enjoy crystal clear images, significantly enhancing the chances of identifying individuals or events. The device boasts a storage capacity of up to 1 terabyte, enabling extended recording times without frequent overwriting, providing peace of mind for users.

An essential component of the Samsung EZ View Kit is its user-friendly interface, which simplifies navigation and setup. Users can access live footage and recordings through a straightforward mobile app, making it easy to monitor premises remotely. The app is compatible with both Android and iOS devices, allowing users to receive real-time alerts directly on their smartphones.

The SDE-3004 also features night vision capabilities, using infrared technology to capture clear images in low-light conditions. This ensures 24/7 surveillance, eliminating blind spots during nighttime hours. Additionally, the kit supports motion detection technology, which triggers recording only when movement is detected, conserving storage and ensuring that users are alerted when necessary.

Furthermore, the system offers easy playback and backup options, allowing users to view previous recordings effortlessly. The simple interface enhances user experience, catering to both tech-savvy individuals and those less familiar with surveillance equipment.

Overall, the Samsung EZ View Kit SDE-3004 stands out for its robust features, cutting-edge technology, and ease of use, providing an efficient solution for modern surveillance needs. With this kit, individuals can enhance their security measures while enjoying the benefits of advanced monitoring technology.
Top Page Image Contents