Samsung SDE-3004, SDE3004 user manual Connecting WEB Viewer, Click Install

Page 66

web viewer

CONNECTING WEB VIEWER

1.Open your web browser and type the IP address or URL of DVR into the URL address box.

MThe basic URL of the DVR is as following in case of MAC address :

http://www.samsungipolis.com/User ID

You can also use registered URL which setups up in the Setup menu of your DVR.

2.Set the Admin ID and password same to those of the DVR Admin.

For general users, enter the DVR user ID and password.

JThe default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.

Note that the security and other related issues caused by the unchanged password shall be responsible for the user.

MIt allows up to 4 simultaneous access including the Admin and general users.

It does not allow multiple login of the Admin user.

Initial password of the Admin user is set to “4321”.

Password of the Admin and general users can be changed in <Permission Management> menu of the DVR.

Normal users should have set <Viewer> under <Permission Management> to “Use” before connecting to the Web Viewer. (Page 35)

All settings are applied by the DVR’s settings.

3.Click <Install ActiveX Control…>.

Downloading Active-X control may take several minutes according to the security settings on your PC.

4.Click <Install>.

66_ web viewer

Image 66
Contents Channel DVR SDE-3004Channel DVR Important Safety Instructions  OverviewOverview Battery Before StartContents Viewer Setup Using Live ViewerUsing Search Viewer SEC Backup ViewerFeatures Package Contents Standards ApprovalsPart Names and Functions Front Part Names and Functions Rear Remote Control Using the Numeric buttonsChanging the Remote Control ID Connecting the VIDEO, AUDIO, and Monitor InstallationChecking the Installation Environment  Connecting withIR LED Connecting the USBConnecting the Camera LensCamera Bracket Specification Installing the cameraConnecting with DVR  Connecting with Other DeviceAdjusting the Camera Bracket Connect the camera cable to the cameraConnecting the Network Connecting to Network through Ethernet 10/100BaseTConnecting to the Network using the router Connecting to Internet through Adsl InternetShutting Down the System Getting StartedStarting the system  LiveLogin Locking All ButtonsLive Screen Configuration Icons on the Live ScreenLive Split Mode Menu Error InformationSplit Mode Menu Live Screen MenuSingle Mode Menu Alarm Freeze View the Launcher MenuSystem Date/Time/Language Time. Switching the screen automatically Live ModeSwitching the screen mode PIPChannel Setting Switching to Single ModeZoom Selecting a Spot Out modeSpot OUT Multichannel Live MenuAudio ON/OFF Audio ON/OFF in Single modeYou can turn the sound on/off the CH1 in Live mode FreezeCH2 System Setup Setting the Date/Time/LanguageDate/Time/Language Setting Holiday Using the CalendarAdmin Setting the AdministratorUsing Virtual Keyboard Permission ManagementSetting the Group To set the group authorityTo restrict the user permissions To change the user passwordLogin UserWhen the user setup is done, press OK Setting the UserSetting Permissions  Using the DVRSystem Management System ManagementChecking the System Information System Information BroadcastS/W Upgrade  Using System Upgrade Updating the SoftwareSettings Log InformationSystem Log Event Log Backup LogBackup Log Use the up/down buttonsCamera Setting the DeviceSetting the Camera Press Enter buttonConfirming Devices When the camera setup is done, press OKStorage Device You can check information on storage devicesSelect Format FormattingYou can format a storage device FormattedHDD Alarm Remote DevicesSetting the Monitor Setting Display positionMonitor Setting the Spot Out Setting the Screen ModeRecord Setting the RecordingRecording Schedule Recording ScheduleEvent Record Duration REC Quality / ResolutionSetting Standard Recording Properties Recording Color TagsSetting Event Recording Properties Record OptionSetting the Event Using the DVRMotion Detection Setting the Motion Detection Area Video Loss DetectionAlarm Schedule You can backup the desired data to a connected device BackupSetting the Backup BackupSetting the Connection Network ConfigurationConnection Mode You can set the network connection route and protocolSetting the Protocol Move to Connection Mode, and press EnterProtocol Connecting and Setting the Network When no router is usedWhen a router is used Internal Port Range Set the same to the External Port RangeLive Transfer Ddns SettingWhen the Ddns setup is done, press OK Live TransferMailing Service Smtp SettingEvent Setting When the recipient setting is done, press OK Group SettingRecipient Setting GroupAdd recipientTime Search It does not appear in Backup SearchSearch You can search for recorded data of a desired timeBackup Search Event SearchSearch & Play Motion Search Motion SearchMotion Region Play Backup RangePlayback  For data search, refer to Search.Mode Switch Using the Playback ButtonREC Records all channels in Live mode Partial Backup DVR setWhat is Web Viewer? Introducing WEB Viewer WEB Viewer Connecting WEB Viewer Click InstallUsing Live Viewer Quad Mode You can change the split mode by clicking each number iconSingle Mode Full Screen ModeSetting the display of the OSD time information Connected DVRSaving the Live Screen on the PC Capture Saves the current screen into a BMP or Jpeg fileUsing Search Viewer SPLIT-SCREEN Saving the Live Screen on the PC Searching the Recorded Video in the Calendar System Viewer SetupYou can configure the various settings of the DVR system Date/Time/LanguageHoliday Permission ManagementSystem Management Device CameraStorage Device Remote Device MonitorRecording Schedule For more information, refer to Setting the Recording.Record Event Record DurationRecord Option REC Quality & ResolutionEvent Motion DetectionVideo Loss Detection Alarm ScheduleYou can set the alarm output time if a video loss occurs Motion Region Set the target motion detection areaNetwork For more information, refer to Network Configuration.You can check the Ddns settings ConnectionMailing Service SmtpAbout What is Mobile Viewer?Key Features Mobile ViewerSEC Backup Viewer Recommended System Requirements Backup Viewer Product Specification Camera Product Specification 500GB Sata HDD Appendix Hdmi Default Setting Category Details Factory DefaultManagement Duration Smtp Troubleshooting 4CIF 2CIFCIF Open Source License Report on the Product GNU General Public LicensePreamble No Warranty How to Apply These Terms to Your New ProgramsEND of Terms and Conditions Terms and Conditions Conveying Verbatim CopiesConveying Modified Source Versions Acceptance Not Required for Having Copies GNU Lesser General Public License Limitation of LiabilityPage How to Apply These Terms to Your New Libraries OpenSSL LicenseOriginal SSLeay License Page Correct disposal of batteries in this product Sales Network Chertsey, Surrey, United Kingdom KT16 OPS
Related manuals
Manual 8 pages 28.56 Kb

SDE-3004, SDE3004 specifications

The Samsung EZ View Kit, model SDE-3004, represents a significant advancement in the domain of camera surveillance systems. Designed for both home and small business use, this intuitive kit combines advanced features with user-friendly technology, ensuring critical security needs are met effectively.

One of the standout features of the SDE-3004 is its four-channel capability, allowing users to connect up to four cameras simultaneously. This flexibility ensures comprehensive coverage of key areas, enhancing the overall surveillance reach without requiring multiple monitoring systems. The kit includes four high-quality, weather-resistant cameras that provide clear video footage in various conditions, making it suitable for outdoor surveillance as well.

The SDE-3004 is equipped with advanced recording technology, offering both real-time and scheduled recording options. With the ability to record in high definition, users can enjoy crystal clear images, significantly enhancing the chances of identifying individuals or events. The device boasts a storage capacity of up to 1 terabyte, enabling extended recording times without frequent overwriting, providing peace of mind for users.

An essential component of the Samsung EZ View Kit is its user-friendly interface, which simplifies navigation and setup. Users can access live footage and recordings through a straightforward mobile app, making it easy to monitor premises remotely. The app is compatible with both Android and iOS devices, allowing users to receive real-time alerts directly on their smartphones.

The SDE-3004 also features night vision capabilities, using infrared technology to capture clear images in low-light conditions. This ensures 24/7 surveillance, eliminating blind spots during nighttime hours. Additionally, the kit supports motion detection technology, which triggers recording only when movement is detected, conserving storage and ensuring that users are alerted when necessary.

Furthermore, the system offers easy playback and backup options, allowing users to view previous recordings effortlessly. The simple interface enhances user experience, catering to both tech-savvy individuals and those less familiar with surveillance equipment.

Overall, the Samsung EZ View Kit SDE-3004 stands out for its robust features, cutting-edge technology, and ease of use, providing an efficient solution for modern surveillance needs. With this kit, individuals can enhance their security measures while enjoying the benefits of advanced monitoring technology.