Samsung SDE3004 Storage Device, Confirming Devices, When the camera setup is done, press OK

•CH Name : Up to 15 characters including blanks are allowed. (The first character should not be empty.)

Refer to “Using Virtual Keyboard”. (Page 32)

•SEQ-Dwell Time : You can set the dwell time between channels for the Live screen and Spot Out.

If set to <OFF>, the channel is not listed in the Auto Sequence mode.

•Screen Setup : The video appeared on the screen may vary depending on the channel’s camera, configure the DVR display to your preferences.

Select a channel and adjust the <(Brightness)>,

< (Contrast)>, and < (Color)> of the selected channel.

•Press the <Init> to initialize settings back to the default 50.

6.When the camera setup is done, press <OK>.

						 USING
Screen Setup						THE
CH1	50	50	50	Init	Apply to All CH
		OK		Cancel
						DVR

Storage Device

You can check information on storage devices.

Confirming Devices

You can check storage devices and their free space, usage as well as status. Devices available are HDD, and USB devices (Memory, HDD).

Using the mouse may help make setup easier.

1. Use the up/down buttons ( ) in <Device> window to move to <Storage Device>, and press [ENTER] button.

2.Select <Device>.

•No. : Shows the assigned number of the internal HDD.

•Used/Total : Shows the used/total capacity of the storage device.

•Used : Sets the storage device’s usage.

-USB memory is used for backup purpose only.

•Status/Management : Shows the current status of the HDD, as in Normal/Check/Replace.

-Normal : Available to use

-Check : Available to use but recommended to replace

-Replace : Requires immediate replacement.

3.To move to the previous menu, press <OK>.

Storage Device
Device		Format	HDD Alarm
Device	No.	Used/Total	Used	Status/Management
HDD	1	6.07G/495.02G	Internal	Normal
HDD Map
		OK	Cancel

English _41