Samsung SDE3004, SDE-3004 user manual Connecting and Setting the Network, When no router is used

Page 55

Connecting and Setting the Network

Networking may differ from the connection method, check your environment before setting the connection mode.

When no router is used

Static IP mode

 

 

 

 

 

-

Internet connection : Static IP ADSL, leased line, and LAN environments allows connection between the

 

DVR and remote user.

 

 

 

 

-

DVR Network Settings : Set the <Connection Mode> in

Connection Mode

 

 

USING

 

<Connection> menu of the connected DVR to <Static IP>.

Connection

Protocol

 

 

 

Consult your network manager for IP, Gateway and Subnet Mask.

Connection Mode

Static IP

 

 

THE

 

 

 

 

 

 

Bandwidth

2Mbps

 

 

 

 

 

 

 

 

Dynamic IP (DHCP) mode

IP

192.168. 1.200

 

DVR

Gateway

192.168. 1.

1

 

 

Subnet Mask

255.255.255. 0

 

-

Internet connection : Connect the DVR directly to a cable

DNS

Manual

 

168.126. 63.

1

 

modem, DHCP ADSL modem or FTTH network.

 

 

 

 

 

-

DVR Network Settings : Set the <Connection Mode> in

 

OK

 

Cancel

 

 

<Connection> menu of the connected DVR to <Dynamic

 

 

 

 

 

 

IP>.

 

 

 

 

 

ADSL (PPPoE: ID and password certification)

-Internet connection : An ADSL modem is directly connected to the DVR, where the ADSL connection requires user ID and password.

-DVR Network Settings : Set the <Connection Mode> in <Connection> menu of the connected DVR to <ADSL>.

ADSL <User ID> and <Password> should be the same to the ADSL user information.

If you don’t know the ID and password, consult your ADSL service provider.

Connection Mode

 

 

Connection

Protocol

 

 

Connection Mode

ADSL

 

 

Bandwidth

600kbps

 

 

IP

192.168. 1.200

 

Gateway

192.168. 1.

1

 

Subnet Mask

255.255.255. 0

 

DNS

Manual

168.126. 63.

1

User ID

ID

 

 

Password

******

 

 

 

OK

Cancel

 

English _55

Image 55
Contents SDE-3004 Channel DVRChannel DVR  Overview Important Safety InstructionsOverview Before Start BatteryContents SEC Backup Viewer Using Live ViewerUsing Search Viewer Viewer SetupFeatures Standards Approvals Package ContentsPart Names and Functions Front Part Names and Functions Rear Using the Numeric buttons Remote ControlChanging the Remote Control ID  Connecting with InstallationChecking the Installation Environment Connecting the VIDEO, AUDIO, and MonitorLens Connecting the USBConnecting the Camera IR LED Connecting with Other Device Installing the cameraConnecting with DVR Camera Bracket SpecificationConnect the camera cable to the camera Adjusting the Camera BracketConnecting to Network through Ethernet 10/100BaseT Connecting the NetworkConnecting to the Network using the router Internet Connecting to Internet through Adsl Live Getting StartedStarting the system Shutting Down the SystemLocking All Buttons LoginIcons on the Live Screen Live Screen ConfigurationLive Live Screen Menu Error InformationSplit Mode Menu Split Mode MenuSingle Mode Menu View the Launcher Menu Alarm FreezeSystem Date/Time/Language Time. PIP Live ModeSwitching the screen mode Switching the screen automaticallySwitching to Single Mode Channel SettingMultichannel Live Menu Selecting a Spot Out modeSpot OUT ZoomFreeze Audio ON/OFF in Single modeYou can turn the sound on/off the CH1 in Live mode Audio ON/OFFCH2 Setting the Date/Time/Language System SetupDate/Time/Language Using the Calendar Setting HolidayPermission Management Setting the AdministratorUsing Virtual Keyboard AdminTo set the group authority Setting the GroupUser To change the user passwordLogin To restrict the user permissions Using the DVR Setting the UserSetting Permissions When the user setup is done, press OKSystem Information System ManagementChecking the System Information System ManagementUpdating the Software  Using System Upgrade  BroadcastS/W UpgradeLog Information SettingsSystem Log Use the up/down buttons Backup LogBackup Log Event LogPress Enter button Setting the DeviceSetting the Camera CameraYou can check information on storage devices When the camera setup is done, press OKStorage Device Confirming DevicesFormatted FormattingYou can format a storage device Select FormatRemote Devices HDD AlarmSetting Display position Setting the MonitorMonitor Setting the Screen Mode Setting the Spot OutRecording Schedule Setting the RecordingRecording Schedule RecordRecording Color Tags REC Quality / ResolutionSetting Standard Recording Properties Event Record DurationRecord Option Setting Event Recording PropertiesUsing the DVR Setting the EventMotion Detection Video Loss Detection Setting the Motion Detection AreaAlarm Schedule Backup BackupSetting the Backup You can backup the desired data to a connected deviceYou can set the network connection route and protocol Network ConfigurationConnection Mode Setting the ConnectionMove to Connection Mode, and press Enter Setting the ProtocolProtocol When no router is used Connecting and Setting the NetworkInternal Port Range Set the same to the External Port Range When a router is usedLive Transfer Ddns SettingWhen the Ddns setup is done, press OK Live TransferSmtp Setting Mailing ServiceEvent Setting GroupAdd recipient Group SettingRecipient Setting When the recipient setting is done, press OKYou can search for recorded data of a desired time It does not appear in Backup SearchSearch Time SearchEvent Search Backup SearchSearch & Play Motion Search Motion SearchMotion Region  For data search, refer to Search. Backup RangePlayback PlayDVR set Using the Playback ButtonREC Records all channels in Live mode Partial Backup Mode SwitchIntroducing WEB Viewer What is Web Viewer? WEB Viewer Click Install Connecting WEB ViewerUsing Live Viewer Full Screen Mode You can change the split mode by clicking each number iconSingle Mode Quad ModeConnected DVR Setting the display of the OSD time informationCapture Saves the current screen into a BMP or Jpeg file Saving the Live Screen on the PCUsing Search Viewer SPLIT-SCREEN Saving the Live Screen on the PC Searching the Recorded Video in the Calendar Date/Time/Language Viewer SetupYou can configure the various settings of the DVR system SystemPermission Management HolidaySystem Management Camera DeviceStorage Device Monitor Remote DeviceEvent Record Duration For more information, refer to Setting the Recording.Record Recording ScheduleMotion Detection REC Quality & ResolutionEvent Record OptionMotion Region Set the target motion detection area Alarm ScheduleYou can set the alarm output time if a video loss occurs Video Loss DetectionConnection For more information, refer to Network Configuration.You can check the Ddns settings NetworkSmtp Mailing ServiceMobile Viewer What is Mobile Viewer?Key Features AboutRecommended System Requirements SEC Backup Viewer Backup Viewer Product Specification Camera 500GB Sata HDD Product Specification Appendix Hdmi Category Details Factory Default Default SettingManagement Duration Smtp Troubleshooting 4CIF 2CIFCIF GNU General Public License Open Source License Report on the ProductPreamble How to Apply These Terms to Your New Programs No WarrantyEND of Terms and Conditions Conveying Verbatim Copies Terms and ConditionsConveying Modified Source Versions Acceptance Not Required for Having Copies Limitation of Liability GNU Lesser General Public LicensePage OpenSSL License How to Apply These Terms to Your New LibrariesOriginal SSLeay License Page Correct disposal of batteries in this product Chertsey, Surrey, United Kingdom KT16 OPS Sales Network
Related manuals
Manual 8 pages 28.56 Kb

SDE-3004, SDE3004 specifications

The Samsung EZ View Kit, model SDE-3004, represents a significant advancement in the domain of camera surveillance systems. Designed for both home and small business use, this intuitive kit combines advanced features with user-friendly technology, ensuring critical security needs are met effectively.

One of the standout features of the SDE-3004 is its four-channel capability, allowing users to connect up to four cameras simultaneously. This flexibility ensures comprehensive coverage of key areas, enhancing the overall surveillance reach without requiring multiple monitoring systems. The kit includes four high-quality, weather-resistant cameras that provide clear video footage in various conditions, making it suitable for outdoor surveillance as well.

The SDE-3004 is equipped with advanced recording technology, offering both real-time and scheduled recording options. With the ability to record in high definition, users can enjoy crystal clear images, significantly enhancing the chances of identifying individuals or events. The device boasts a storage capacity of up to 1 terabyte, enabling extended recording times without frequent overwriting, providing peace of mind for users.

An essential component of the Samsung EZ View Kit is its user-friendly interface, which simplifies navigation and setup. Users can access live footage and recordings through a straightforward mobile app, making it easy to monitor premises remotely. The app is compatible with both Android and iOS devices, allowing users to receive real-time alerts directly on their smartphones.

The SDE-3004 also features night vision capabilities, using infrared technology to capture clear images in low-light conditions. This ensures 24/7 surveillance, eliminating blind spots during nighttime hours. Additionally, the kit supports motion detection technology, which triggers recording only when movement is detected, conserving storage and ensuring that users are alerted when necessary.

Furthermore, the system offers easy playback and backup options, allowing users to view previous recordings effortlessly. The simple interface enhances user experience, catering to both tech-savvy individuals and those less familiar with surveillance equipment.

Overall, the Samsung EZ View Kit SDE-3004 stands out for its robust features, cutting-edge technology, and ease of use, providing an efficient solution for modern surveillance needs. With this kit, individuals can enhance their security measures while enjoying the benefits of advanced monitoring technology.