Samsung SDE-3004, SDE3004 Setting the Device, Setting the Camera, Press Enter button

Page 40

using the DVR

SETTING THE DEVICE

You can setup Camera, Storage Device, Remote Device and Monitor.

Camera

Setting the Camera

You can set Video, Audio, Channel Name and Dwell Time of a Camera.

Using the mouse may help make setup easier.

1.Press the [MENU] button on the remote control.

2.Use the left/right button (◄ ►) to select <Device>. Device setting menu is selected.

3. Use the up/down buttons (

) to move to <Camera>,

and press [ENTER] button.

 

Logout

Device

Camera

Storage Device

Remote Device

Monitor

Return

4.Select <Camera>.

You will see a window where you can configure the camera settings including Video, Audio, CH Name, SEQ- Dwell Time.

5. Use direction buttons (

) to move to a desired

item, and set the value.

 

Video

-<ON/OFF> : You can turn ON/OFF the selected channel’s camera.

Camera

Camera

CH

Video

 

Audio

 

CH Name

SEQ-Dwell Time

 

1

ON

ON

CAM 01

5 sec

2

ON

OFF

CAM 02

5 sec

3

ON

OFF

CAM 03

5 sec

4

ON

OFF

CAM 04

5 sec

Screen Setup

OK Cancel

-<Covert1> : Shows information other than the video of the selected channel.

For privacy protection, it does not display the video while the recording continues.

-<Covert2> : Shows nothing but an empty screen while the recording continues.

Audio

-If set to <ON>, you can turn the audio of the channel ON/OFF on the Live screen.

-If set to <OFF>, the channel’s audio is off on the Live screen and not recorded.

-For SEB-1006R (MIC integrated camera), you must connect it to CH1 and set CH1 Audio to “ON” in the Camera menu.

Audio output is available for only CH1.

40_ using the DVR

Image 40
Contents Channel DVR SDE-3004Channel DVR Important Safety Instructions  OverviewOverview Battery Before StartContents Using Live Viewer Using Search ViewerViewer Setup SEC Backup ViewerFeatures Package Contents Standards ApprovalsPart Names and Functions Front Part Names and Functions Rear Using the Numeric buttons Remote ControlChanging the Remote Control ID Installation Checking the Installation EnvironmentConnecting the VIDEO, AUDIO, and Monitor  Connecting withConnecting the USB Connecting the CameraIR LED LensInstalling the camera Connecting with DVRCamera Bracket Specification  Connecting with Other DeviceAdjusting the Camera Bracket Connect the camera cable to the cameraConnecting to Network through Ethernet 10/100BaseT Connecting the NetworkConnecting to the Network using the router Connecting to Internet through Adsl InternetGetting Started Starting the systemShutting Down the System  LiveLogin Locking All ButtonsIcons on the Live Screen Live Screen ConfigurationLive Error Information Split Mode MenuSplit Mode Menu Live Screen MenuSingle Mode Menu View the Launcher Menu Alarm FreezeSystem Date/Time/Language Time. Live Mode Switching the screen modeSwitching the screen automatically PIPChannel Setting Switching to Single ModeSelecting a Spot Out mode Spot OUTZoom Multichannel Live MenuAudio ON/OFF in Single mode You can turn the sound on/off the CH1 in Live modeAudio ON/OFF FreezeCH2 Setting the Date/Time/Language System SetupDate/Time/Language Setting Holiday Using the CalendarSetting the Administrator Using Virtual KeyboardAdmin Permission ManagementSetting the Group To set the group authorityTo change the user password LoginTo restrict the user permissions UserSetting the User Setting PermissionsWhen the user setup is done, press OK  Using the DVRSystem Management Checking the System InformationSystem Management System Information Using  System Upgrade BroadcastS/W Upgrade Updating the SoftwareLog Information SettingsSystem Log Backup Log Backup LogEvent Log Use the up/down buttonsSetting the Device Setting the CameraCamera Press Enter buttonWhen the camera setup is done, press OK Storage DeviceConfirming Devices You can check information on storage devicesFormatting You can format a storage deviceSelect Format FormattedHDD Alarm Remote DevicesSetting Display position Setting the MonitorMonitor Setting the Spot Out Setting the Screen ModeSetting the Recording Recording ScheduleRecord Recording ScheduleREC Quality / Resolution Setting Standard Recording PropertiesEvent Record Duration Recording Color TagsSetting Event Recording Properties Record OptionUsing the DVR Setting the EventMotion Detection Setting the Motion Detection Area Video Loss DetectionAlarm Schedule Backup Setting the BackupYou can backup the desired data to a connected device BackupNetwork Configuration Connection ModeSetting the Connection You can set the network connection route and protocolMove to Connection Mode, and press Enter Setting the ProtocolProtocol Connecting and Setting the Network When no router is usedWhen a router is used Internal Port Range Set the same to the External Port RangeDdns Setting When the Ddns setup is done, press OKLive Transfer Live TransferSmtp Setting Mailing ServiceEvent Setting Group Setting Recipient SettingWhen the recipient setting is done, press OK GroupAdd recipientIt does not appear in Backup Search SearchTime Search You can search for recorded data of a desired timeEvent Search Backup SearchSearch & Play Motion Search Motion SearchMotion Region Backup Range PlaybackPlay  For data search, refer to Search.Using the Playback Button REC Records all channels in Live mode Partial BackupMode Switch DVR setIntroducing WEB Viewer What is Web Viewer? WEB Viewer Connecting WEB Viewer Click InstallUsing Live Viewer You can change the split mode by clicking each number icon Single ModeQuad Mode Full Screen ModeSetting the display of the OSD time information Connected DVRSaving the Live Screen on the PC Capture Saves the current screen into a BMP or Jpeg fileUsing Search Viewer SPLIT-SCREEN Saving the Live Screen on the PC Searching the Recorded Video in the Calendar Viewer Setup You can configure the various settings of the DVR systemSystem Date/Time/LanguageHoliday Permission ManagementSystem Management Camera DeviceStorage Device Remote Device MonitorFor more information, refer to Setting the Recording. RecordRecording Schedule Event Record DurationREC Quality & Resolution EventRecord Option Motion DetectionAlarm Schedule You can set the alarm output time if a video loss occursVideo Loss Detection Motion Region Set the target motion detection areaFor more information, refer to Network Configuration. You can check the Ddns settingsNetwork ConnectionMailing Service SmtpWhat is Mobile Viewer? Key FeaturesAbout Mobile ViewerSEC Backup Viewer Recommended System Requirements Backup Viewer Product Specification Camera 500GB Sata HDD Product Specification Appendix Hdmi Category Details Factory Default Default SettingManagement Duration Smtp Troubleshooting 4CIF 2CIFCIF GNU General Public License Open Source License Report on the ProductPreamble How to Apply These Terms to Your New Programs No WarrantyEND of Terms and Conditions Terms and Conditions Conveying Verbatim CopiesConveying Modified Source Versions Acceptance Not Required for Having Copies GNU Lesser General Public License Limitation of LiabilityPage OpenSSL License How to Apply These Terms to Your New LibrariesOriginal SSLeay License Page Correct disposal of batteries in this product Sales Network Chertsey, Surrey, United Kingdom KT16 OPS
Related manuals
Manual 8 pages 28.56 Kb

SDE-3004, SDE3004 specifications

The Samsung EZ View Kit, model SDE-3004, represents a significant advancement in the domain of camera surveillance systems. Designed for both home and small business use, this intuitive kit combines advanced features with user-friendly technology, ensuring critical security needs are met effectively.

One of the standout features of the SDE-3004 is its four-channel capability, allowing users to connect up to four cameras simultaneously. This flexibility ensures comprehensive coverage of key areas, enhancing the overall surveillance reach without requiring multiple monitoring systems. The kit includes four high-quality, weather-resistant cameras that provide clear video footage in various conditions, making it suitable for outdoor surveillance as well.

The SDE-3004 is equipped with advanced recording technology, offering both real-time and scheduled recording options. With the ability to record in high definition, users can enjoy crystal clear images, significantly enhancing the chances of identifying individuals or events. The device boasts a storage capacity of up to 1 terabyte, enabling extended recording times without frequent overwriting, providing peace of mind for users.

An essential component of the Samsung EZ View Kit is its user-friendly interface, which simplifies navigation and setup. Users can access live footage and recordings through a straightforward mobile app, making it easy to monitor premises remotely. The app is compatible with both Android and iOS devices, allowing users to receive real-time alerts directly on their smartphones.

The SDE-3004 also features night vision capabilities, using infrared technology to capture clear images in low-light conditions. This ensures 24/7 surveillance, eliminating blind spots during nighttime hours. Additionally, the kit supports motion detection technology, which triggers recording only when movement is detected, conserving storage and ensuring that users are alerted when necessary.

Furthermore, the system offers easy playback and backup options, allowing users to view previous recordings effortlessly. The simple interface enhances user experience, catering to both tech-savvy individuals and those less familiar with surveillance equipment.

Overall, the Samsung EZ View Kit SDE-3004 stands out for its robust features, cutting-edge technology, and ease of use, providing an efficient solution for modern surveillance needs. With this kit, individuals can enhance their security measures while enjoying the benefits of advanced monitoring technology.