Samsung SDE-3004, SDE3004 user manual Mailing Service, Smtp Setting, Event Setting

using the DVR

Mailing Service

You can send an e-mail to a DVR-registered user at a specific time interval, or if an event occurs.

M If an event occurs with a channel where the camera’s video is set to <OFF> or the remaining recording count is set to <OFF>, only the text notification will be sent to the applicable email address.

SMTP Setting

Sets the SMTP mail server.

Using the mouse may help make setup easier.

1.	In the <Network> setting window, press the up/down			Mailing Service
	(	) button to move to <Mailing Service> and press the
				SMTP	Event			Group		Recipient
	[ENTER] button.
				 ServerType	SMTP mail Server
2.	Select <SMTP>.			 Server
				 Port
					25
	You will see the SMTP setting window.
				 User
3.	Use direction buttons (		) to move to a desired item	Use Authentication
				 Password
				 Secure Transfer
					Never
	and set the value.
				 Sender					ex. user@example.net
• ServerType : Displays the connected server type.				TEST
						OK	Cancel

•Server : Enter a server to connect to.

•Port : Sets the communication port.

•Use Authentication : Check this if the SMTP server uses user authentication. The account input box will be activated.

•User : Enter a user to use authentication when connecting to the SMTP server.

•Password : Enter the password of the SMTP server user.

•Secure Transfer : Select one from <Never> and <TLS(if Available)>.

•Sender : Use the virtual keyboard to enter the sender’s e-mail address.

 Refer to “Using Virtual Keyboard”. (Page 32)

•TEST : Conducts the test on the server settings.

4.When the SMTP setting is done, press <OK>.

Event Setting

You can set the interval and type of the event that will be sent to the user.

Using the mouse may help make setup easier.

1.In the <Network> setting window, press the up/down

( ) button to move to <Mailing Service> and press the [ENTER] button.

2.Select <Event>.

3. Use direction buttons (	) to move to a desired item
and set the value.

•Event Interval : Set the event interval.

If a series of events occurs, the e-mail will be sent at the specified interval, not on each event.

Mailing Service

SMTP	Event	Group	Recipient
 Event Interval	10 min
 Use Event Transfer
Motion
Change P/W	HDD Info		Video Loss
Power On/Off	Manual Record
	OK	Cancel

•Use Event Transfer : Select an event type to send if an event occurs.

If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.

4.When the event setting is done, press <OK>.

58_ using the DVR