Samsung SDE3004, SDE-3004 user manual Setting the Spot Out, Setting the Screen Mode

Setting the Spot Out

You can set the DVR to output information / video apart from the monitor out.

Using the mouse may help make setup easier.

1. Use the up/down buttons ( ) in <Device> window to move to <Monitor>, and press [ENTER] button.

2.Select <Spot Out>.

The number of Spot Out terminals differs according to the model.

3. Use direction buttons (	) to move to a desired
item, and set the value.

Monitor
Monitor	Spot Out	Mode
 Spot Out 1	SEQ	Set Mode	All
 Event Display	OFF
	OK	Cancel

 USING THE

•Spot Out 1 : You can select between Auto Sequence, and Single.

•Set Mode : A window for “Set Spot Out” appears and you can set the channel for it.

You can set the dwell time between the screen switching in “Setting the Device > Camera > SEQ-Dwell Time”. (Page 41)

M You can setup using the mouse right button in Live screen. Refer to “Spot Out”. (Page 27)

4.When the Spot Out is done, press <OK>.

Monitor

Monitor		Spot Out	Mode
 Spot	Set Spot Out
 Event Display		OFF
	1	2	3	4
			OK
		OK	Cancel

DVR

Setting the Screen Mode

You can configure the Live screen and Split Screens.

Using the mouse may help make setup easier.

1.	Use the up/down buttons (	) in <Device> window to
2.	move to <Monitor>, and press [ENTER] button.
	Select <Mode>.
3.	Use direction buttons (	) to move to a desired
	item, and set the value.

• Live Screen : Select split modes for the Live screen.

4-split screens are included by default.

• Play Screen : Select split modes for the playback screen.

Monitor

Monitor

Live Screen

Play Screen

Spot Out

Mode

LivePlay

Single screen and 4-split screen are provided by default.

4.When the screen mode setup is done, press <OK>.

OK Cancel

English _45