The descriptions of every setting in this menu will be given below:
Item | Description |
Self PinCode | A random |
| you wish to connect supports PINCODE, please input this code |
| to the AP you wish to connect. This code changes every time |
| you enter this page. |
|
|
Configure via | If the wireless AP you wish to connect supports push button |
Push Button | WPS configuration, click ‘Start PBC’ and press the WPS button |
| on the wireless AP to start pairing. |
| You can also press ‘WPS / Reset’ button located at the back of |
| IP camera for the same purpose. DO NOT press and hold |
| ‘WPS / Reset’ button for too long time, if you press and hold |
| ‘WPS / Reset’ button for more than 10 seconds, all settings in |
| IP camera will be lost! |
|
|
Configure via | If the wireless AP already generates a |
PinCode | input the code here and click ‘Start PIN’ button to start pairing. |
|
|
Wireless | Select ‘Enable’ to activate wireless network function of this IP |
Connection | camera, select ‘Disable’ to disable it. |
|
|
Network Type | Select the network type of wireless connection. |
| Available options are ‘Infrastructure’ (Connect the IP camera to |
| a wireless access point), and ‘Adhoc’ (This IP camera will |
| become a |
| computers / devices can discover this IP camera and connect |
| to it without wireless access point). |
| You can set to ‘Adhoc’ when you don’t have any wireless |
| access point, but your computer has wireless network card. Set |
| to ‘Infrastructure’ when you have wireless access point, and |
| you have computers with wired network connection. |
|
|
Available | Here shows all wireless access points found by this IP camera. |
Networks | Please note not all access points will be displayed at the same |
| time, if the access point you wish to connect does not appear, |
| you may have to click ‘Refresh’ button for several times until it |
| appears. |
| The descriptions of all fields is listed below: |
|
|