Airlink101 AIC600W user manual LAN Settings, IP Address

Page 18

2.2 LAN Settings

All network-related settings can be found in this menu, and you have to specify TCP/IP parameters in this menu if you want to change IP address, use PPPoE, Dynamic DNS, and activate UPnP function.

You can access this menu by clicking ‘LAN’ on the top of web management interface.

2.2.1 IP Address

You can define IP address and select the port number you wish to use here.

Image 18

Contents ConnectSky600W Wireless N MPEG4 Network Camera Table of Contents Software Installation Using ConnectSky Viewer Package Contents Familiar with your Internet IP CameraBasic Introduction Product Highlights Familiar with Key Components Front Panel LEDsBack Panel Camera Installation Click Install ConnectSky Setup Wizard Page Web Page Page Using Web Management Interface Camera SettingsDescription About LAN Settings IP AddressTo input ‘http//10.20.20.3090’ Rtsp Dynamic DNS UPnP Page LoginFree Wlan Description Ssid 1Mbps to 54Mbps. Maximum transfer rate for 802.11b wireless Ascii Video Dual Mode MPEG4 Mjpeg Email Settings Email & FTPFTP Settings Address here, or any other actual oneDescription Basic Settings Motion DetectionSetup Motion Detection Regions Description Schedule Snapshot System Camera InformationDate / Time Setting PM 92430 =WEB Browser During Upgrade UtilitiesAlso. You’ll need to change the IP address setting of your Status Account Description 11 Log Software Installation Click Install ConnectSky ViewerPage Using ConnectSky Viewer Page Page Configuring ConnectSky Viewer Configure Cameras1.1 ‘Camera’ tab MPEG4 Page Schedule Recording Please specify the time duration of this one-time schedule Audio Motion Record Page General Settings GeneralMail Setting Page Security About Change Display Layout Page Page Full-screen mode Scan Snapshot Recording Video Playback Specification AppendixLED Troubleshooting If you’re connecting this camera from Internet, it Page Technical Support