Airlink101 AIC600W user manual Setup Motion Detection Regions

	server.
Send snapshot	Select ‘Yes’ to send a picture to the Email address you
file to Email	specified in ‘E-Mail & FTP’ menu when a motion is detection,
	and select ‘No’ to disable this function.
E-Mail Subject	Set the subject of Email being sent here. This will help you to
	distinguish the Email sent by this IP camera from others.
Send snapshot	Select ‘Yes’ to send a picture to the FTP server you specified in
file to FTP	‘E-Mail & FTP’ menu when a motion is detection, and select
	‘No’ to disable this function.

Click ‘Apply’ to save settings and make the new settings take effect.

2.6.2 Setup Motion Detection Regions

If you only want to be notified when motion is detected in certain area of captured image, you can use this function and motions outside of motion detection region will be ignored, so you won’t receive too much ‘useless’ notifications.

This IP camera supports up to 3 motion detection regions. To setup detection region, Please use your mouse to drag and resize motion detection regions marked as ‘Region1’, ‘Region2’, and ‘Region3’ (appear as yellow, green, and red squares on image: