Airlink101 AIC600W user manual FTP Settings, Address here, or any other actual one

SMTP Server	Input the IP address or host name of the SMTP server (the
	server that delivers the Email for you) here.
	If you don’t know, please refer to the SMTP server you’re using
	in your Email software (i.e. Microsoft Outlook), or ask your
	network administrator or ISP.
SMTP Port	Input mail server’s SMTP port here. Most of mail servers use
	port number 25.
Sender E-Mail	Input the Email address of mail sender, this will help you to
Address	identify the Email sent by this IP camera by sender’s Email
	address.
	NOTE: Some mail server would reject to deliver the Email from
	unknown sender, it’s recommended to input your own Email
	address here, or any other actual one.
SMTP	Some SMTP server requires mail senders to be authenticated
Authentication	before they can send Email. If your SMTP server requires you
	to do so, please select ‘Enable’, or select ‘Disable’ to disable it.
	If you don’t know, please refer to the SMTP server you’re using
	in your Email software (i.e. Microsoft Outlook), or ask your
	network administrator or ISP.
User Name	Please input the user name of SMTP server here, if your SMTP
	server requires the use of authentication.
Password	Please input the password of SMTP server here, if your SMTP
	server requires the use of authentication.

Click ‘Apply’ to save settings and make the new settings take effect.

After that, you can click ‘Send a test email’ to send a testing Email to the address you set here, so you can make sure the setting you specified here is correct and working.

2.5.2 FTP Settings

These settings are used to send the captured picture by FTP: