The descriptions of every setting in this menu will be given below:
Item | Description |
FTP Server | Input the IP address or host name of the FTP server you wish |
| to use here. |
|
|
FTP Port | Input the port number of the FTP server you wish to use here. |
|
|
User Name | Input the user name of the FTP server you wish to use here. |
|
|
Password | Input the password of the FTP server you wish to use here. |
|
|
Remote Folder | Input the remote folder name on the FTP server here. If nothing |
| is specified here, all uploaded image files will be placed in FTP |
| server’s root directory. |
| Please ask FTP server’s administrator to know which folder you |
| should use. Certain user name may have restrictions and |
| therefore can not place the file in the directory not owned by the |
| user. |
|
|
Passive Mode | Select ‘Enable’ to use passive mode to send file, or select |
| ‘Disable’ to not to use passive mode to send file. |
| Some FTP servers require passive mode, if you don’t know, |
| please ask FTP server’s administrator; most of FTP servers will |
| work fine with both modes, but if you found that |
| mode is not working, you can try to use passive mode. |
|
|
Click ‘Apply’ to save settings and make the new settings take effect.
After that, you can click ‘Upload a test file’ to send a file to the FTP server you set here, so you can make sure the setting you specified here is correct and working.