Airlink101 AIC600W user manual Ascii

	If the key length is 64-bit, you should input 10 HEX characters
	or 5 ASCII characters, like 112233aabb (HEX) or MYWEP
	(ASCII).
	If the key length is 128-bit, you should input 26 HEX characters
	or 13 ASCII characters, like 11223344556677889900abcdef
	(HEX) or myweppassword (ASCII).
WEP Key Format	Select the Key Format of WEP key here. Available options are
	‘HEX’ and ‘ASCII’.
	When you select ‘HEX’ WEP key format, you can only use
	numbers (0 to 9), and alphabet a to f as WEP key; when you
	select ‘ASCII’ WEP key format, you can use all alphanumerical
	characters, and is case sensitive.
Default Key	Select the default key set that the IP camera should use
	against the wireless access point when WEP encryption is
	used.
	Available options are 1 to 4.
WEP Key 1	Input the 1st set of WEP key here. At least a set of WEP key is
	required if you use WEP as Authentication.
	You should enter the key value into WEP Key 1 if you only have
	one key.
WEP Key 2	Input the 2nd set of WEP key here.
WEP Key 3	Input the 3rd set of WEP key here.
WEP Key 4	Input the 4th set of WEP key here.

Click ‘Apply’ to save settings and make the new settings take effect.