CD/MP3 Operation
English |
IMPORTANT: |
The lens of the CD player should never be touched.
Loading a disc
This CD player plays Audio Discs including CD- Recordables,
●
1Select CD source.
2Press OPEN/CLOSE3 on
the top of the system to open the CD compartment.
➜OPEN is displayed when you open the CD compartment.
3Insert a disc with the printed side facing up and press down on OPEN/CLOSE3 to close the CD door.
➜ READING is displayed as the CD player
scans the contents of a disc, and then the total number of tracks and playing time (or the total number of albums and tracks for MP3 disc) are shown.
Basic playback controls
To play a disc
●Press 2; to start playback.
➜ The current track number and elapsed playing time of the track are displayed during disc playback.
To select a different track
●Press TUNING 4 ¢ (or 4 ¢ on the remote control) once or repeatedly until the desired track number appears in the display.
To find a passage within a track
1Press and hold down on TUNING 4 ¢ (or 4 ¢ on the remote control).
➜ The disc is played at high speed and low volume.
2When you recognise the passage you want, release TUNING 4 ¢ (or 4 ¢ on the remote control).
➜ Normal playback continues.
To interrupt playback
●Press 2; during playback.
➜The display freezes and the elapsed playing time flashes when playback is interrupted.
➜To resume, press 2; again.
To stop playback
●Press 9.
Notes: CD play will also stop when;
–the CD door is opened.
–the disc has reached the end.
–you select another source: TAPE,TUNER or AUX.
–you select standby.
–you press the tape deck PLAY 2 key.
Playing an MP3 disc
1Load an MP3 disc.
➜The disc reading time may exceed 10 seconds due to the large number of songs compiled into one disc.
➜"YY XXX" is displayed. YY is the total album number and XXX is the total track number.
2Press ALBUM/PRESET 4 3 (or 4 3 on the remote control) to select a desired album.
14