Philips MCM204 user manual Remote control does not function, Properly, Time is not working

Page 24

English

Troubleshooting

Problem

 

Solution

The remote control does not function

✔

Select the source (CD or TUNER, for example)

properly.

 

before pressing the function button (É,í,ë).

 

✔ Reduce the distance between the remote

 

 

control and the system.

 

✔ Insert the batteries with their polarities

 

 

(+/– signs) aligned as indicated.

 

✔

Replace the batteries.

 

✔ Point the remote control directly towards the IR

 

 

sensor.

The time is not working.

✔

Set the clock correctly.

 

✔ Press TIMER to switch on the timer.

 

✔ If recording or tape dubbing is in progress, stop

 

 

recording.

The Clock/Timer setting is erased.

✔

Power has been interrupted or the power cord

 

 

has been disconnected. Reset the clock/timer.

The USB device doesn’t play on my

✔

It is not set in the USB mode. Select USB mode.

MCM204

✔

The device is not securely connected to

 

 

MCM204’s USB port. Re-connect the device, and

 

 

make sure that the device is powered on.

✔ The device is not supported by MCM204, or the audio file format stored on the device is not supported by MCM204. Use a compatible device/ playable audio file format.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Micro Hi-Fi System MCM204How to connect a plug Important notes for users in the U.KMains plug Copyright in the U.KPage Klass 1 laseraparat 101 120139 158Contents Supplied accessories Safety InformationGeneral Information Environmental InformationHearing Safety Listen at a moderate volumeTo establish a safe volume level Set your volume control at a low settingPower PreparationsRear connections MW AntennaBefore using the remote control Replacing battery lithium CR2025 into the remote controlFM Antenna Speakers Connection Front SpeakersControls on the system and remote control Controls available on the remote control onlySwitching the system on Power-saving automatic standbyBasic Functions Adjusting volume and sound CD/MP3 Operation Loading a discBasic playback controls Playing an MP3 discDifferent play modes Shuffle and Repeat Programming track numbersReviewing the programme Erasing the programmeTuning to radio stations Tuning to preset radio stationsRadio Reception Programming radio stationsTape Operation / Recording Tape playbackGeneral information on recording Synchro start CD recording To select and record a particular passage within a CD trackOther Connection Recording from the radioListening to an external source Using USB connectivity USB ConnectionSupported formats System will not play or support the followingInformation Regarding USB Direct Clock/Timer Setting the clockSetting the timer Activating and deactivatingSpecifications MaintenanceTroubleshooting Check the speaker connections and locationRemote control does not function Clock/Timer setting is erasedProperly Time is not workingFrançais Meet Philips at the Internet
Top Page Image Contents