Clock/Timer
Setting the clock
1In standby mode, press and hold DISPLAY/ CLOCK on the set (or CLOCK on the remote control) for 2 seconds.
➜ The clock digits for the hours flash.
2Press TUNING 4 ¢ to set the hours.
3Press DISPLAY/CLOCK again.
➜ The clock digits for the minutes flash.
4Press TUNING 4 ¢ to set the minutes.
5Press DISPLAY/CLOCK to confirm the time.
Note:
– The backlight for clock display is off in standby.
Setting the timer
●The system can be used as an alarm clock, whereby the CD or TUNER or USB is switched on at a set time.The clock time needs to be set first before the timer can be used.
1In standby mode, press and hold TIMER about 2 seconds on the remote control.
2Press SOURCE (or CD/USB/TUNER on the remote control) to select sound source.
3Press TIMER to confirm your desired mode. ➜ The clock digits for the hours flash.
4Press TUNING 4 ¢ to set the hours.
5Press TIMER again.
➜ The clock digits for the minutes flash.
6Press TUNING 4 ¢ to set the minutes.
7Press TIMER to confirm the time.
➜ The timer is now set and activated.
Notes:
–Timer is not available in TAPE or AUX mode.
–If CD source is selected and no disc is in the CD tray or the disc has an error,TUNER will be selected automatically.
–If USB source is selected and no compatible USB device is plugged,TUNER will be selected automatically.
Activating and deactivating
TIMER
●In standby or during playback, press TIMER once.
➜ Display shows 
if activated, and disappears if deactivated.
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off by itself after a set period of time.
●Press SLEEP on the remote
control once or more.
➜ Display shows 
and one of the sleep time options in sequence: 60, 45, 30,15, 0, 60... if you have selected a time.
●To deactivate, press SLEEP on the remote control once or more until “ 0“ is shown, or press STANDBY ON ECO POWER on the system (or 2 on the remote control).
➜ 
disappears from the display.
English
21