Sharp MD-X8 Minidisc Operation, Loading and playing MiniDiscs, To remove a MiniDisc, After use

(Continued)

Cautions:
I Do not carry the unit with a disc left in a disc tray. The disc may	I If TV or radio interference occurs during CD operation, move the unit
come loose inside the unit and be damaged or cause damage	away from the TV or radio.
to the unit. This may also cause malfunctions.	I If the disc is damaged, dirty, or loaded upside down, the disc will be
I If you press the CD 06 button, one of the CD PLAY buttons (1-3)
	skipped and the next disc will be automatically played.
on the main unit or remote control, or any of the CD 7 buttons while	I If the main unit is subjected to a sharp jolt or it is used where
the disc tray is open, the disc tray will close automatically. Therefore,
be careful not to get your fingers caught in the disc tray.	vibrations are present, sound dropouts may occur. Use the unit in a
	stable environment.
I Do not place two CDs in one disc position.
	I If the volume is set to too high, a dropout may occur due to vibrations
I Do not push the disc tray while it is moving.
	from the speakers. If this happens, move the main unit away from the
I If the power fails while the tray is open, wait until the power is	speakers or turn down the volume.
restored before trying to close it.	I Do not use CDs with loose cellphane tape or stickers or CDs which
I If the disc tray is stopped forcibly, “ERROR” will appear on the
	have glue left on the surface from tape or stickers. If such a CD is
display and the unit will not function.	inserted, you may not be able to remove the CD or the unit may
If this occurs, turn the power off, and turn it on again.	cause malfunction.

MINIDISC OPERATION

MD

MD playback indicator

MD indicator

MD

MD indicator

Total number	Total playing time
of tracks

M D WWW 1 2 WWW 5 5 : 0 8 W T O T A L B E S T W H I T S WWWWWWWWWWWW 1 W L O V E W S O N GWWWWWWW 2 WW A V E WWWWWWWWWWWW 3 W F O R W E V E R WWWWWWWW

Disc name Track name

HLoading and playing MiniDiscs

1Press the MD H button.

IThe power will be turned on automatically,and the unit will enter the MD playback mode.

2Load a recorded MiniDisc in the direction indicated by the arrow on the MiniDisc, with the labeled side facing up.

IThe total number of tracks and the total disc playing time will be displayed. At this time, the MD indicator will light.

3Press the MD 06 button.

IThe MD playback indicator will light and playback will begin from track 1on the disc you have specified.

IWhen the last track has been played back, this unit will stop automati- cally.

To interrupt playback:

Press the MD06 button.

IThe MD playback indicator will flash.

IPress the MD06 button to resume playback from the same point.

To stop playback

Press the MD H button.

To remove a MiniDisc:

Press the 7 button.

IThe MiniDisc will be ejected.

Notes:

IAlthough vibration will not normally cause a MiniDisc to skip, you may hear a skip in the sound if there is continuous vibration.

IWhen you listen to MiniDiscs near a radio or a TV set, the radio or the TV set may pick up noise.

Keep the unit as far away as possible from tuners.

IWhen a optionally available sound card is used, an MD inserted in this product can be played from a personal computer.

Direct playback

If a MiniDisc is loaded in the unit, pressing the MD 06 button turns the power on, and begins playback.

After use:

Press the POWER button to turn the power off.

Note:

IThe power cannot be turned off while reading the information on a MiniDisc.

IIf no disc and track names have been recoded on an MiniDisc, they will not appear on the display.

18

*17-21 18 98.6.23, 0:11 PM