Sharp MD-X60H operation manual Convenient CD and MD Operations, Direct-selection play

Page 22

<P=002>

CONVENIENT CD AND MD OPERATIONS

CD

1 -3

CD

MD

DIRECT	MD
KEY	CD
	CD

CD

1 -3

■Direct-selection play

By using the DIRECT KEY on the remote control, you can play any track directly.

When CD is selected:

1 Press one of the CD 1 0 - 3 0 buttons to select the CD you want to listen to.

2 Press the CD ■ button.

3 Use the DIRECT KEY to select the desired track number.

When MD is selected:

1 Press the MD ■ button.

2 Use the DIRECT KEY to select the desired track number.

A. To select track numbers 11 to 99

Press the Y 10 button first, then press the track number.

For example, to select 36:

①Press the Y 10 button.

②Within 5 seconds, press the "3" button.

③Within 5 seconds, press the "6" button.

B. To select a track number 100 or higher (only for MDs)

Press the Y 10 button twice, then press the track number.

For example, to select 128:

①Press the Y 10 button.

②Within 5 seconds, press the Y 10 button.

③Within 5 seconds, press the "1" button.

④Within 5 seconds, press the "2" button.

⑤Within 5 seconds, press the "8" button.

The beginning of the selected track will be found, and play will begin automatically.

Notes:

●A track number higher than the number of tracks on the disc cannot be selected.

●During APMS play or random play, track number selection play is not possible.

CD

MD

Jog dial

MD

MD

CD

CD

■APSS (Auto Program Search System)

APSS automatically locates the beginning of any track.

To move to the beginning of the next track:

During playback ... Turn the jog dial clockwise.

Or press the 4 button on the remote control.

To restart the track being played:

During playback ... Turn the jog dial anti-clockwise.

Or press the 5 button on the remote control.

When using the jog dial whilst in the stop mode:

Every time the jog dial is turned (or each time the 5 or 4 button on the remote control is pressed), the track number will go up or down by one. If you press the 0 6 button, playback will begin from the track being displayed.

21

MD-X60H(SUK) TINSE0227AWZZ

Image 22

Contents Contents AccessoriesSpecial Notes If YOU have ANY DOUBT, Consult a Qualified ELECTRI- CianPrecautions Front panel Names of Controls and IndicatorsRear panel Display window Speaker sectionTuner control section Remote controlRDS control section MD control sectionSpeaker connection Preparation for USEAerial connection Removing the speaker grilles Connecting the AC power leadRemote control Mounting the speaker grillesResetting the date and time Setting the ClockChecking the date and time Display Section Sound ControlCompact Disc Operation To stop playback Loading and playing CDsTo interrupt playback To remove the CDsLoading and playing MiniDiscs When choosing a CD for playbackMinidisc Operation Direct playbackAuto tuning TuningManual tuning Radio OperationTo recall a memorised station Preset tuningTo enter stations into memory For example, to selectReceiving FM Stations with RDS Radio Data System Information Provided by RDSAspm Auto Station Program Memory To erase all of the contents of preset memoryTo stop the Aspm operation before it is complete Programme type If you have selected the traffic programmeTo switch the display To manually recall the stations stored in memoryChecking the stand-by mode setting To cancel the EON stand-by modeEON-TI Cassette Operation Normal playbackDirect-selection play Convenient CD and MD OperationsApss Auto Program Search System Repeat and random play To cancel repeat or random playCue and review To search very quicklyTo clear the programmed selections To cancel the ApmsApms Automatic Programmable Music Selector To check which tracks are programmedWhen the MD does not have a track name Switching the time displayWhen the MD has a track name Changing the display during MD playbackDisc writing TOC RecordingDifferences from tape recordings About track numbersIf recording does not begin To cancel the operationRecording from a CD onto a MiniDisc One-Touch Editing To stop recordingTo change a programmed track To cancel the track edit operationTo cancel a programmed track You can also perform the following operationApms recording To record without using One-Touch EditingTo re-record To record the track number whilst recording What is the space-cut function?Recording from the built-in radio onto a MiniDisc To interrupt recordingTo record from a cassette tape To record from a CD onto a MiniDiscTo record from the built-in radio onto a MiniDisc Recording from a CD or an MD to a cassette tape Synchronised Recording System=003 Recording from a CD Recording from a MiniDisc Beat cancel switch on the rear panel Recording from the built-in radio to a cassette tapeStep Using the editing functionEditing Recording the editing resultsProgrammed move Type of characters usedTotal number of characters per MiniDisc To create a disc name To create a track nameTo change track names To change disc names and track namesTo change disc names To add a characterCombine When both tracks have a nameDivide To combine two non-contiguous tracksProgrammed move MoveExample To erase tracks one at a time EraseTo erase all of the tracks at once Setting timer playback HOW to USE the BUILT-IN TimerTo select the timer playback mode To change the timer settingTo select the timer recording mode Setting timer recordingSleep operation Simultaneous sleep and timer operation Using External Units Connecting external unitsConnecting a portable MD player HeadphonesListening to sound from an external unit Recording sound from an external unitTo turn off the auto mark function Manual recordingTrack numbers Recording CDs from a digital sourceTo record from a track which is in the middle of a MiniDisc Recording from a portable MD player MD 0 MD EditTo record only a single track What is a MINIDISC? Minidisc System Limitations TroubleshootingIf a problem occurs GeneralTape recording and playback MD recording and playbackRadio reception Moisture condensation If a problem occurs ∗Number or Symbol Error messages Meaning RemedyNumber or Symbol ∗SymbolInternal care MaintenanceSpecifications External careSharp Corporation