Sharp MD-X60H operation manual Cue and review, Repeat and random play, To search very quickly

Page 23

<P=003>

(Continued)

MD

CD

■Cue and review

During playback hold the 2button ( 4button on the remote control) down for audible fast forward, and hold the 3 button ( 5 button on the remote control) down for audible fast reverse.

Normal playback will resume when the 2or 3( 4or 5) button is released.

Notes:

●When the beginning of the first track is reached, normal playback will start.

●When the end of the last track is reached, "DISC END" will light, and the unit will pause.

If you want to listen to a portion of a track again, press the 3 ( 5) button to return to the point in the track you want to listen to. Normal playback will start from that point.

To search very quickly:

When fast forward or fast reverse is used whilst in the pause mode, the playback point will move more quickly than when using audible fast forward or audible fast reverse playback.

●In this mode, no sound is heard. Therefore, you should refer to the time display.

●When you lift your finger, the unit will re-enter the pause mode.

			CD
			1 -3
			CD
			CD
			MD
			MD
	MD	P-MODE
	MD	MD
		MD
	CD	CD
		CD
		1	-3
	Repeat indicator	Random indicator	Disappears

■Repeat and random play

1 Select the desired programme source, CD or MD, by pressing the CD ■ or MD ■ button.

2 Press the P-MODE button on the remote control.

●Each time this button is pressed, the mode will change in the following order: Repeat play → Random play → Normal play → Repeat play

3 Press the CD 0 6 or MD 0 6 button to start playback.

●To specify a disc from disc trays 1 - 3, press one of the CD 1 0 - 3 0 buttons (only for CDs).

Repeat play

After the last track has been played, playback will return to the first track and begin again.

Random play

When the CD 0 6 or CD 1 0 - 3 0 buttons are pressed, all of the tracks will be played at random, and then playback will stop. (The same track will not be played back twice.)

To cancel repeat or random play:

Press the P-MODE button until the "R" or "RANDOM" display disappears.

To repeat playback of selected tracks:

Enter the programme for the tracks you want and start repeat play.

You can programme a single track and play it repeatedly (Refer to page 23).

Notes:

●During APMS play, random play is not possible.

●When random or repeat play is selected during CD or MD playback, random or repeat play will start at that point.

22

MD-X60H(SUK) TINSE0227AWZZ

Image 23

Contents Accessories ContentsIf YOU have ANY DOUBT, Consult a Qualified ELECTRI- Cian Special NotesPrecautions Rear panel Names of Controls and IndicatorsFront panel Speaker section Display windowMD control section Remote controlRDS control section Tuner control sectionAerial connection Preparation for USESpeaker connection Mounting the speaker grilles Connecting the AC power leadRemote control Removing the speaker grillesChecking the date and time Setting the ClockResetting the date and time Compact Disc Operation Sound ControlDisplay Section To remove the CDs Loading and playing CDsTo interrupt playback To stop playbackDirect playback When choosing a CD for playbackMinidisc Operation Loading and playing MiniDiscsRadio Operation TuningManual tuning Auto tuningFor example, to select Preset tuningTo enter stations into memory To recall a memorised stationInformation Provided by RDS Receiving FM Stations with RDS Radio Data SystemTo stop the Aspm operation before it is complete To erase all of the contents of preset memoryAspm Auto Station Program Memory If you have selected the traffic programme Programme typeTo manually recall the stations stored in memory To switch the displayTo cancel the EON stand-by mode Checking the stand-by mode settingEON-TI Normal playback Cassette OperationApss Auto Program Search System Convenient CD and MD OperationsDirect-selection play To search very quickly To cancel repeat or random playCue and review Repeat and random playTo check which tracks are programmed To cancel the ApmsApms Automatic Programmable Music Selector To clear the programmed selectionsChanging the display during MD playback Switching the time displayWhen the MD has a track name When the MD does not have a track nameAbout track numbers RecordingDifferences from tape recordings Disc writing TOCTo stop recording To cancel the operationRecording from a CD onto a MiniDisc One-Touch Editing If recording does not beginYou can also perform the following operation To cancel the track edit operationTo cancel a programmed track To change a programmed trackTo re-record To record without using One-Touch EditingApms recording To interrupt recording What is the space-cut function?Recording from the built-in radio onto a MiniDisc To record the track number whilst recordingTo record from the built-in radio onto a MiniDisc To record from a CD onto a MiniDiscTo record from a cassette tape Synchronised Recording System Recording from a CD or an MD to a cassette tape=003 Recording from a CD Recording from a MiniDisc Recording from the built-in radio to a cassette tape Beat cancel switch on the rear panelRecording the editing results Using the editing functionEditing StepTotal number of characters per MiniDisc Type of characters usedProgrammed move To create a track name To create a disc nameTo add a character To change disc names and track namesTo change disc names To change track namesTo combine two non-contiguous tracks When both tracks have a nameDivide CombineExample MoveProgrammed move To erase all of the tracks at once EraseTo erase tracks one at a time To change the timer setting HOW to USE the BUILT-IN TimerTo select the timer playback mode Setting timer playbackSetting timer recording To select the timer recording modeSleep operation Simultaneous sleep and timer operation Connecting external units Using External UnitsHeadphones Connecting a portable MD playerRecording sound from an external unit Listening to sound from an external unitRecording CDs from a digital source Manual recordingTrack numbers To turn off the auto mark functionTo record only a single track Recording from a portable MD player MD 0 MD EditTo record from a track which is in the middle of a MiniDisc What is a MINIDISC? General TroubleshootingIf a problem occurs Minidisc System LimitationsRadio reception MD recording and playbackTape recording and playback Moisture condensation If a problem occurs ∗Symbol Error messages Meaning RemedyNumber or Symbol ∗Number or SymbolExternal care MaintenanceSpecifications Internal careSharp Corporation