Sharp MD-X60H operation manual Sleep operation Simultaneous sleep and timer operation

Page 44
Play the desired sound source. Press the TIMER/DELETE button.

<P=005>

(Continued)

To check the timer setting:

①Whilst in the timer stand-by mode, press the TIMER/DELETE button.

②Within 10 seconds, turn the jog dial so that the "TIMER CALL" display appears.

③Within 10 seconds, press the ENTER button.

●The timer settings will appear in order, and then the original display will reappear.

To cancel the timer operation:

If the power is turned on, the timer will be cancelled. The timer operation can also be cancelled as follows.

①Whilst in the timer stand-by mode, press the TIMER/DELETE button.

②Turn the jog dial so that the "TIMER CANCEL" display appears.

③Within 10 seconds, press the ENTER button.

●The timer operation will be cancelled ("TIMER" or "TIMER REC" will go off.) The start and stop times will be stored.

TIMER/

DELETE

Jog dial

ENTER

3

4

5

■ Sleep operation

■ Simultaneous sleep and timer operation

 

 

 

The radio, compact disc and MiniDisc can all be turned off automat- ically.

1

2

3 Within 10 seconds, turn the jog dial so that the "SLEEP" display appears.

4 Within 10 seconds, press the ENTER button.

●If you do not need to change the time, go to step 5.

To change the sleep time:

Whilst the sleep time is displayed, turn the jog dial to adjust the time. (Maximum: 2 hours - Minimum: 1 minute)

The amount of sleep time can also be changed during the sleep oper- ation.

●2 hours - 5 minutes → 5-minute intervals

●5 minutes - 1 minute → 1-minute intervals

5 Press the ENTER button.

6 The unit will enter the stand-by mode automatically after the preset sleep time has elapsed.

●The volume will decrease gradually 1 minute before the preset sleep time has elapsed. At this time, you cannot change the volume.

To confirm the sleep timer setting:

①Press the TIMER/DELETE button.

②Turn the jog dial so that the "SLEEP" display appears.

To use sleep and timer playback in combination:

①Perform steps 1 - 13 on page 41 "To select the timer playback mode".

②Perform steps 1 - 5 on page 43 "Sleep operation".

③Perform steps 1 - 2 on page 41 "Setting timer playback".

To use sleep and timer recording in combination:

①Perform steps 1 - 12 on page 42 "To select the timer recording mode".

②Perform steps 1 - 5 on page 43 "Sleep operation".

③Perform steps 1 - 2 on page 42 "Setting timer recording".

Sleep timer setting

 

 

Timer playback

Timer playback

(record) setting

(record) start

 

1 minute - 2 hours

 

Desired time

Sleep operation

will

End time

automatically stop.

 

To cancel the sleep operation:

If the unit enters the stand-by mode, the sleep operation will be can- celled. The sleep operation can also be cancelled as follows if you cannot set the unit to the stand-by mode during recording.

①Press the TIMER/DELETE button.

②Turn the jog dial so that the "SLEEP OFF" display appears.

③Within 10 seconds, press the ENTER button.

●The sleep operation will be cancelled. ("SLEEP" will go off.)

Notes:

●Once the sleep time is set, it will remain the same duration until the setting is changed.

●The sleep functions of this unit cannot be used to control equipment connected to this unit. You must use the sleep functions of the other equipment, if it has them.

Notes:

●When the CD or MD is played to the end, playback will stop before the stop time.

If you wish to play to the stop time, set repeat play for the CD or MD.

●Timer recording starts about 15 seconds before the start time.

43

MD-X60H(SUK) TINSE0227AWZZ

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Contents AccessoriesSpecial Notes If YOU have ANY DOUBT, Consult a Qualified ELECTRI- CianPrecautions Rear panel Names of Controls and IndicatorsFront panel Display window Speaker sectionRemote control RDS control sectionTuner control section MD control sectionAerial connection Preparation for USESpeaker connection Connecting the AC power lead Remote controlRemoving the speaker grilles Mounting the speaker grillesChecking the date and time Setting the ClockResetting the date and time Compact Disc Operation Sound ControlDisplay Section Loading and playing CDs To interrupt playbackTo stop playback To remove the CDsWhen choosing a CD for playback Minidisc OperationLoading and playing MiniDiscs Direct playbackTuning Manual tuningAuto tuning Radio OperationPreset tuning To enter stations into memoryTo recall a memorised station For example, to selectReceiving FM Stations with RDS Radio Data System Information Provided by RDSTo stop the Aspm operation before it is complete To erase all of the contents of preset memoryAspm Auto Station Program Memory Programme type If you have selected the traffic programmeTo switch the display To manually recall the stations stored in memoryChecking the stand-by mode setting To cancel the EON stand-by modeEON-TI Cassette Operation Normal playbackApss Auto Program Search System Convenient CD and MD OperationsDirect-selection play To cancel repeat or random play Cue and reviewRepeat and random play To search very quicklyTo cancel the Apms Apms Automatic Programmable Music SelectorTo clear the programmed selections To check which tracks are programmedSwitching the time display When the MD has a track nameWhen the MD does not have a track name Changing the display during MD playbackRecording Differences from tape recordingsDisc writing TOC About track numbersTo cancel the operation Recording from a CD onto a MiniDisc One-Touch EditingIf recording does not begin To stop recordingTo cancel the track edit operation To cancel a programmed trackTo change a programmed track You can also perform the following operationTo re-record To record without using One-Touch EditingApms recording What is the space-cut function? Recording from the built-in radio onto a MiniDiscTo record the track number whilst recording To interrupt recordingTo record from the built-in radio onto a MiniDisc To record from a CD onto a MiniDiscTo record from a cassette tape Recording from a CD or an MD to a cassette tape Synchronised Recording System=003 Recording from a CD Recording from a MiniDisc Beat cancel switch on the rear panel Recording from the built-in radio to a cassette tapeUsing the editing function EditingStep Recording the editing resultsTotal number of characters per MiniDisc Type of characters usedProgrammed move To create a disc name To create a track nameTo change disc names and track names To change disc namesTo change track names To add a characterWhen both tracks have a name DivideCombine To combine two non-contiguous tracksExample MoveProgrammed move To erase all of the tracks at once EraseTo erase tracks one at a time HOW to USE the BUILT-IN Timer To select the timer playback modeSetting timer playback To change the timer settingTo select the timer recording mode Setting timer recordingSleep operation Simultaneous sleep and timer operation Using External Units Connecting external unitsConnecting a portable MD player HeadphonesListening to sound from an external unit Recording sound from an external unitManual recording Track numbersTo turn off the auto mark function Recording CDs from a digital sourceTo record only a single track Recording from a portable MD player MD 0 MD EditTo record from a track which is in the middle of a MiniDisc What is a MINIDISC? Troubleshooting If a problem occursMinidisc System Limitations GeneralRadio reception MD recording and playbackTape recording and playback Moisture condensation If a problem occurs Error messages Meaning Remedy Number or Symbol∗Number or Symbol ∗SymbolMaintenance SpecificationsInternal care External careSharp Corporation
Top Page Image Contents