Sharp MD-X60H operation manual To record from a CD onto a MiniDisc, To record from a cassette tape

Page 31

YO <P=001>

(Continued)

MD

DISPLAY

32

MD

DISPLAY

2

3	2

2

3

3

4

2

2

3

■Recording a track you want to add at the beginning of a MiniDisc (Pole Position Editing)

When a track is added to an MD which already has recordings on it, and the POLE POSITION button is pressed, the track can be recorded at the beginning of the MD.

To record from a CD onto a MiniDisc:

1 Prepare for recording.

One-Touch Editing: (Page 26. Steps 1 to 3)

Track Editing: (Page 27. Steps 1 to 5)

Hypertrack Editing: (Page 27. Steps 1 to 6)

2 Press the POLE POSITION button.

●" " will be displayed.

3 Press the CD 0 MD button.

●Recording will begin.

If recording does not start when the CD 0 MD button is pressed:

If you cannot record all of the tracks you have selected from a CD, the number of tracks and the amount of time that can be included on the recording, and the number of tracks and the amount of time that cannot be included will both be displayed. The unit will then enter the recording stand-by mode.

To record from a cassette tape:

1 Perform steps 1 to 6 on page 29 "One-Touch Editing".

2 Press the POLE POSITION button.

●" " will be displayed.

3 Press the TAPE 0 MD button.

●Recording will begin.

To record from the built-in radio onto a MiniDisc:

1 Perform steps 1 to 5 on page 29 "Recording from the built-in radio onto a MiniDisc".

2 Press the POLE POSITION button.

●" " will be displayed.

3 Press the MD ●REC button.

●The unit will enter the recording stand-by mode.

4 Press the MD 0 6 button.

●Recording will begin.

30

MD-X60H(SUK) TINSE0227AWZZ

Image 31

Contents Accessories ContentsIf YOU have ANY DOUBT, Consult a Qualified ELECTRI- Cian Special NotesPrecautions Front panel Names of Controls and IndicatorsRear panel Speaker section Display windowMD control section Remote controlRDS control section Tuner control sectionSpeaker connection Preparation for USEAerial connection Mounting the speaker grilles Connecting the AC power leadRemote control Removing the speaker grillesResetting the date and time Setting the ClockChecking the date and time Display Section Sound ControlCompact Disc Operation To remove the CDs Loading and playing CDsTo interrupt playback To stop playbackDirect playback When choosing a CD for playbackMinidisc Operation Loading and playing MiniDiscsRadio Operation TuningManual tuning Auto tuningFor example, to select Preset tuningTo enter stations into memory To recall a memorised stationInformation Provided by RDS Receiving FM Stations with RDS Radio Data SystemAspm Auto Station Program Memory To erase all of the contents of preset memoryTo stop the Aspm operation before it is complete If you have selected the traffic programme Programme typeTo manually recall the stations stored in memory To switch the displayTo cancel the EON stand-by mode Checking the stand-by mode settingEON-TI Normal playback Cassette OperationDirect-selection play Convenient CD and MD OperationsApss Auto Program Search System To search very quickly To cancel repeat or random playCue and review Repeat and random playTo check which tracks are programmed To cancel the ApmsApms Automatic Programmable Music Selector To clear the programmed selectionsChanging the display during MD playback Switching the time displayWhen the MD has a track name When the MD does not have a track nameAbout track numbers RecordingDifferences from tape recordings Disc writing TOCTo stop recording To cancel the operationRecording from a CD onto a MiniDisc One-Touch Editing If recording does not beginYou can also perform the following operation To cancel the track edit operationTo cancel a programmed track To change a programmed trackApms recording To record without using One-Touch EditingTo re-record To interrupt recording What is the space-cut function?Recording from the built-in radio onto a MiniDisc To record the track number whilst recordingTo record from a cassette tape To record from a CD onto a MiniDiscTo record from the built-in radio onto a MiniDisc Synchronised Recording System Recording from a CD or an MD to a cassette tape=003 Recording from a CD Recording from a MiniDisc Recording from the built-in radio to a cassette tape Beat cancel switch on the rear panelRecording the editing results Using the editing functionEditing StepProgrammed move Type of characters usedTotal number of characters per MiniDisc To create a track name To create a disc nameTo add a character To change disc names and track namesTo change disc names To change track namesTo combine two non-contiguous tracks When both tracks have a nameDivide CombineProgrammed move MoveExample To erase tracks one at a time EraseTo erase all of the tracks at once To change the timer setting HOW to USE the BUILT-IN TimerTo select the timer playback mode Setting timer playbackSetting timer recording To select the timer recording modeSleep operation Simultaneous sleep and timer operation Connecting external units Using External UnitsHeadphones Connecting a portable MD playerRecording sound from an external unit Listening to sound from an external unitRecording CDs from a digital source Manual recordingTrack numbers To turn off the auto mark functionTo record from a track which is in the middle of a MiniDisc Recording from a portable MD player MD 0 MD EditTo record only a single track What is a MINIDISC? General TroubleshootingIf a problem occurs Minidisc System LimitationsTape recording and playback MD recording and playbackRadio reception Moisture condensation If a problem occurs ∗Symbol Error messages Meaning RemedyNumber or Symbol ∗Number or SymbolExternal care MaintenanceSpecifications Internal careSharp Corporation