Sharp MD-X60H Divide, Combine, When both tracks have a name, To combine two non-contiguous tracks

Page 39

<P=004>

 

(Continued)

 

 

1

 

MD

2

3,4

 

2

1

 

2

 

3

 

4

 

 

1

 

MD

2

3,4

 

1,2

1

 

2

 

3

 

4

 

■Divide

1 Play the track which you want to divide into two, and press the MD 0 6 button at the point where you want to divide the track.

●The unit will enter the pause mode.

2 Press the NAME/TOC EDIT button, and within 10 seconds, select "DIVIDE" using the jog dial.

3 Within 10 seconds, press the ENTER button.

●To cancel the operation, press the MD ■ button.

4 Press the ENTER button again.

●The track is divided, and the unit is stopped at the beginning of the second of the two tracks.

●The numbers of the tracks which come after the divided track are automatically increased by one.

●When a track which has been given a name is divided, the two new tracks will have the same name and date. If the "TOC FULL" message is seen, the second track may not be given a name. (Page 50)

Notes:

●This unit can hold up to 255 tracks. However, even if the number of tracks assigned has not reached 255, it might not be possible to make any further divisions of tracks. (Page 50)

●This function cannot be used whilst a programme is being entered ("PROGRAM" is lit: Page 23) or whilst in the random play mode ("RANDOM" is lit: Page 22). First, cancel the programme or random play mode before trying to use this function.

■Combine

1 Whilst in the stop mode, select the second of the two adjacent tracks you want to combine using the jog dial.

Or start playing the second of the two tracks you want to combine, and then press the MD 0 6 button.

●The unit will enter the pause mode.

2 Press the NAME/TOC EDIT button, and within 10 seconds, select "COMBINE" using the jog dial.

3 Within 10 seconds, press the ENTER button.

●To cancel the operation, press the MD ■ button.

4 Press the ENTER button again.

●The two tracks are combined, and the unit is stopped at the beginning of the combined track.

●The numbers assigned to the tracks following the combined track are automat- ically decreased by one.

When both tracks have a name:

●When only the first track has a name → That name will be used.

●When only the second of the two tracks has a name → That name will be used.

●When both tracks have a name → The name of the first track will be used.

To combine two non-contiguous tracks:

(Example: the first and third tracks)

Move the third track to the second track using the MOVE function. (Page 39) Then, combine the first and second tracks using the COMBINE function.

Notes:

●Tracks recorded from analogue inputs cannot be combined with tracks recorded from CDs or MDs using the digital inputs.

●Tracks recorded in the stereo mode cannot be combined with tracks recorded in the monaural long-play mode.

●Tracks where either track's recording time is less than 15 seconds may not be combined.

●This function cannot be used whilst a programme is being entered ("PROGRAM" is lit: Page 23) or whilst in the random play mode ("RANDOM" is lit: Page 22). First, cancel the programme or random play mode before trying to use this function.

38

MD-X60H(SUK) TINSE0227AWZZ

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Accessories ContentsIf YOU have ANY DOUBT, Consult a Qualified ELECTRI- Cian Special NotesPrecautions Names of Controls and Indicators Front panelRear panel Speaker section Display windowMD control section Remote controlRDS control section Tuner control sectionPreparation for USE Speaker connectionAerial connection Mounting the speaker grilles Connecting the AC power leadRemote control Removing the speaker grillesSetting the Clock Resetting the date and timeChecking the date and time Sound Control Display SectionCompact Disc Operation To remove the CDs Loading and playing CDsTo interrupt playback To stop playbackDirect playback When choosing a CD for playbackMinidisc Operation Loading and playing MiniDiscsRadio Operation TuningManual tuning Auto tuningFor example, to select Preset tuningTo enter stations into memory To recall a memorised stationInformation Provided by RDS Receiving FM Stations with RDS Radio Data SystemTo erase all of the contents of preset memory Aspm Auto Station Program MemoryTo stop the Aspm operation before it is complete If you have selected the traffic programme Programme typeTo manually recall the stations stored in memory To switch the displayTo cancel the EON stand-by mode Checking the stand-by mode settingEON-TI Normal playback Cassette OperationConvenient CD and MD Operations Direct-selection playApss Auto Program Search System To search very quickly To cancel repeat or random playCue and review Repeat and random playTo check which tracks are programmed To cancel the ApmsApms Automatic Programmable Music Selector To clear the programmed selectionsChanging the display during MD playback Switching the time displayWhen the MD has a track name When the MD does not have a track nameAbout track numbers RecordingDifferences from tape recordings Disc writing TOCTo stop recording To cancel the operationRecording from a CD onto a MiniDisc One-Touch Editing If recording does not beginYou can also perform the following operation To cancel the track edit operationTo cancel a programmed track To change a programmed trackTo record without using One-Touch Editing Apms recordingTo re-record To interrupt recording What is the space-cut function?Recording from the built-in radio onto a MiniDisc To record the track number whilst recordingTo record from a CD onto a MiniDisc To record from a cassette tapeTo record from the built-in radio onto a MiniDisc Synchronised Recording System Recording from a CD or an MD to a cassette tape=003 Recording from a CD Recording from a MiniDisc Recording from the built-in radio to a cassette tape Beat cancel switch on the rear panelRecording the editing results Using the editing functionEditing StepType of characters used Programmed moveTotal number of characters per MiniDisc To create a track name To create a disc nameTo add a character To change disc names and track namesTo change disc names To change track namesTo combine two non-contiguous tracks When both tracks have a nameDivide CombineMove Programmed moveExample Erase To erase tracks one at a timeTo erase all of the tracks at once To change the timer setting HOW to USE the BUILT-IN TimerTo select the timer playback mode Setting timer playbackSetting timer recording To select the timer recording modeSleep operation Simultaneous sleep and timer operation Connecting external units Using External UnitsHeadphones Connecting a portable MD playerRecording sound from an external unit Listening to sound from an external unitRecording CDs from a digital source Manual recordingTrack numbers To turn off the auto mark functionRecording from a portable MD player MD 0 MD Edit To record from a track which is in the middle of a MiniDiscTo record only a single track What is a MINIDISC? General TroubleshootingIf a problem occurs Minidisc System LimitationsMD recording and playback Tape recording and playbackRadio reception Moisture condensation If a problem occurs ∗Symbol Error messages Meaning RemedyNumber or Symbol ∗Number or SymbolExternal care MaintenanceSpecifications Internal careSharp Corporation
Top Page Image Contents