Sharp MD-X60H operation manual To select the timer recording mode, Setting timer recording

Page 43

<P=004>

(Continued)

TIMER/

DELETE

Jog dial

ENTER

2

3,4

5

6

7

8

9

10

11

12

1

2

■To select the timer recording mode

Before timer recording, the following preparations are required.

●Load a recordable MD or Tape.

●Preset the radio station.

●Before making an MD recording, make sure that the unit is in the recording mode.

●Before making a tape recording, select the recording system and set the Dolby B NR on or off.

1 Press the TIMER/DELETE button.

2 Within 10 seconds, turn the jog dial so that the "TIMER SET" display appears.

3 Within 10 seconds, press the ENTER button.

4 Select "TIMER REC" by using the jog dial.

5 Press the ENTER button.

●The start time setting display will appear.

6 Turn the jog dial to set the hour at which to start, and then press the ENTER button.

7 Turn the jog dial to set the minute at which to start, and then press the ENTER button.

●If not set manually, the ending time will automatically be set for one hour after the starting time.

8 Turn the jog dial to set the hour at to stop, then press the ENTER button.

9 Turn the jog dial to set the minute at to stop, then press the ENTER button.

10Turn the jog dial to select the function, and then press ENTER button.

MD CD TAPE TUNER AUX 1 AUX 2 AUX OPT.

●If TUNER is selected, press the ENTER button, then select the preset number using the jog dial.

●When no stations have been programmed, "NO PRESET" will be displayed, and the programme operation will end. In this case, programme some stations and then reprogramme from the beginning.

11Select "MD REC" or "TAPE REC" by using the jog dial and then press the ENTER button.

12Adjust the sound level using the jog dial and then press the ENTER button.

●Be careful not to turn the volume up too high.

To change the timer setting:

Start again from steps 1 - 12.

■Setting timer recording

1 Press the TIMER/DELETE button.

●Turn the jog dial so that the "T-STANDBY" display appears.

●If the start and stop times have not been set, the "T-STANDBY" display does not appear. Set the time.

2 Press the ENTER button.

●The settings will appear in order, and the unit will enter the timer recording stand-by mode. (The unit will enter the stand-by mode.)

Caution:

In the following cases, the timer recording function will not work

●When a MiniDisc has not been inserted

●When a playback-only MiniDisc is inserted

●When the MiniDisc you inserted is protected against accidental erasure

●When there is no recording space left on the MiniDisc you have inserted (when the "TOC FULL" or "DISC FULL" messages appear)

42

MD-X60H(SUK) TINSE0227AWZZ

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Accessories ContentsIf YOU have ANY DOUBT, Consult a Qualified ELECTRI- Cian Special NotesPrecautions Front panel Names of Controls and IndicatorsRear panel Speaker section Display windowMD control section Remote controlRDS control section Tuner control sectionSpeaker connection Preparation for USEAerial connection Mounting the speaker grilles Connecting the AC power leadRemote control Removing the speaker grillesResetting the date and time Setting the ClockChecking the date and time Display Section Sound ControlCompact Disc Operation To remove the CDs Loading and playing CDsTo interrupt playback To stop playbackDirect playback When choosing a CD for playbackMinidisc Operation Loading and playing MiniDiscsRadio Operation TuningManual tuning Auto tuningFor example, to select Preset tuningTo enter stations into memory To recall a memorised stationInformation Provided by RDS Receiving FM Stations with RDS Radio Data SystemAspm Auto Station Program Memory To erase all of the contents of preset memoryTo stop the Aspm operation before it is complete If you have selected the traffic programme Programme typeTo manually recall the stations stored in memory To switch the displayTo cancel the EON stand-by mode Checking the stand-by mode settingEON-TI Normal playback Cassette OperationDirect-selection play Convenient CD and MD OperationsApss Auto Program Search System To search very quickly To cancel repeat or random playCue and review Repeat and random playTo check which tracks are programmed To cancel the ApmsApms Automatic Programmable Music Selector To clear the programmed selectionsChanging the display during MD playback Switching the time displayWhen the MD has a track name When the MD does not have a track nameAbout track numbers RecordingDifferences from tape recordings Disc writing TOCTo stop recording To cancel the operationRecording from a CD onto a MiniDisc One-Touch Editing If recording does not beginYou can also perform the following operation To cancel the track edit operationTo cancel a programmed track To change a programmed trackApms recording To record without using One-Touch EditingTo re-record To interrupt recording What is the space-cut function?Recording from the built-in radio onto a MiniDisc To record the track number whilst recordingTo record from a cassette tape To record from a CD onto a MiniDiscTo record from the built-in radio onto a MiniDisc Synchronised Recording System Recording from a CD or an MD to a cassette tape=003 Recording from a CD Recording from a MiniDisc Recording from the built-in radio to a cassette tape Beat cancel switch on the rear panelRecording the editing results Using the editing functionEditing StepProgrammed move Type of characters usedTotal number of characters per MiniDisc To create a track name To create a disc nameTo add a character To change disc names and track namesTo change disc names To change track namesTo combine two non-contiguous tracks When both tracks have a nameDivide CombineProgrammed move MoveExample To erase tracks one at a time EraseTo erase all of the tracks at once To change the timer setting HOW to USE the BUILT-IN TimerTo select the timer playback mode Setting timer playbackSetting timer recording To select the timer recording modeSleep operation Simultaneous sleep and timer operation Connecting external units Using External UnitsHeadphones Connecting a portable MD playerRecording sound from an external unit Listening to sound from an external unitRecording CDs from a digital source Manual recordingTrack numbers To turn off the auto mark functionTo record from a track which is in the middle of a MiniDisc Recording from a portable MD player MD 0 MD EditTo record only a single track What is a MINIDISC? General TroubleshootingIf a problem occurs Minidisc System LimitationsTape recording and playback MD recording and playbackRadio reception Moisture condensation If a problem occurs ∗Symbol Error messages Meaning RemedyNumber or Symbol ∗Number or SymbolExternal care MaintenanceSpecifications Internal careSharp Corporation
Top Page Image Contents