Sharp MD-X60H operation manual =003 Recording from a CD Recording from a MiniDisc

Page 33

<P=003>
(Continued)
	4
5,6	4
	4
3	7
3	7
2
1
4
4
2
3
7 Recording from a CD:
7 Recording from a MiniDisc:

■Recording desired tracks from a CD or an MD to a cassette tape (Track Editing)

Several consecutive tracks, starting from the first track on a CD or an MD (for example: from the first track to the fourth track), can be recorded onto a tape.

1 Load a blank cassette into the cassette compartment.

2 Press the REVERSE MODE button.

... To record on only one side.

... To record on both sides.

3 Select the Dolby NR mode by pressing the DOLBY NR button.

●When recording with the Dolby NR system, turn on the indicator.

●When not recording with the Dolby NR system, turn off the indicator.

4 Select the desired source CD or MiniDisc by pressing the CD ■ or MD ■ button.

5 Press the TRACK EDIT button.

6 Select the last track to record by pressing the TRACK EDIT button.

7 Recording from a CD:

Press the CD 0 TAPE button.

Recording from a MiniDisc:

Press the MD 0 TAPE button.

To stop recording:

Press the CD ■ or TAPE ■ button.

5

4,7

6

5

4,7

8

	3	8
	2	8
	2
	1
	4	5
	4	5
	4

3	2

■Recording only your favorite tracks on a tape whilst listen- ing to a CD or an MD (Hypertrack Editing)

If you programme your favorite tracks whilst listening to a CD or an MD, you can record the programmed tracks all together onto a tape after listening to the disc.

1 Load a blank cassette into the cassette compartment.

2 Press the REVERSE MODE button.

... To record on only one side.

... To record on both sides.

3 Select the Dolby NR mode by pressing the DOLBY NR button.

●When recording with the Dolby NR system, turn on the indicator.

●When not recording with the Dolby NR system, turn off the indicator.

4 Select the desired source CD or MiniDisc by pressing the CD ■ or MD ■ button.

5 Press the CD 0 6 or MD 0 6 button.

6 Press the TRACK EDIT button whilst playing the track you want to record later. 7 Stop the CD or MiniDisc by pressing the CD ■ or MD ■ button.

8 Recording from a CD:

Press the CD 0 TAPE button.

Recording from a MiniDisc:

Press the MD 0 TAPE button.

32

MD-X60H(SUK) TINSE0227AWZZ

Image 33

Contents Accessories ContentsIf YOU have ANY DOUBT, Consult a Qualified ELECTRI- Cian Special NotesPrecautions Names of Controls and Indicators Front panelRear panel Speaker section Display windowRDS control section Remote controlTuner control section MD control sectionPreparation for USE Speaker connectionAerial connection Remote control Connecting the AC power leadRemoving the speaker grilles Mounting the speaker grillesSetting the Clock Resetting the date and timeChecking the date and time Sound Control Display SectionCompact Disc Operation To interrupt playback Loading and playing CDsTo stop playback To remove the CDsMinidisc Operation When choosing a CD for playbackLoading and playing MiniDiscs Direct playbackManual tuning TuningAuto tuning Radio OperationTo enter stations into memory Preset tuningTo recall a memorised station For example, to selectInformation Provided by RDS Receiving FM Stations with RDS Radio Data SystemTo erase all of the contents of preset memory Aspm Auto Station Program MemoryTo stop the Aspm operation before it is complete If you have selected the traffic programme Programme typeTo manually recall the stations stored in memory To switch the displayTo cancel the EON stand-by mode Checking the stand-by mode settingEON-TI Normal playback Cassette OperationConvenient CD and MD Operations Direct-selection playApss Auto Program Search System Cue and review To cancel repeat or random playRepeat and random play To search very quicklyApms Automatic Programmable Music Selector To cancel the ApmsTo clear the programmed selections To check which tracks are programmedWhen the MD has a track name Switching the time displayWhen the MD does not have a track name Changing the display during MD playbackDifferences from tape recordings RecordingDisc writing TOC About track numbersRecording from a CD onto a MiniDisc One-Touch Editing To cancel the operationIf recording does not begin To stop recordingTo cancel a programmed track To cancel the track edit operationTo change a programmed track You can also perform the following operationTo record without using One-Touch Editing Apms recordingTo re-record Recording from the built-in radio onto a MiniDisc What is the space-cut function?To record the track number whilst recording To interrupt recordingTo record from a CD onto a MiniDisc To record from a cassette tapeTo record from the built-in radio onto a MiniDisc Synchronised Recording System Recording from a CD or an MD to a cassette tape=003 Recording from a CD Recording from a MiniDisc Recording from the built-in radio to a cassette tape Beat cancel switch on the rear panelEditing Using the editing functionStep Recording the editing resultsType of characters used Programmed moveTotal number of characters per MiniDisc To create a track name To create a disc nameTo change disc names To change disc names and track namesTo change track names To add a characterDivide When both tracks have a nameCombine To combine two non-contiguous tracksMove Programmed moveExample Erase To erase tracks one at a timeTo erase all of the tracks at once To select the timer playback mode HOW to USE the BUILT-IN TimerSetting timer playback To change the timer settingSetting timer recording To select the timer recording modeSleep operation Simultaneous sleep and timer operation Connecting external units Using External UnitsHeadphones Connecting a portable MD playerRecording sound from an external unit Listening to sound from an external unitTrack numbers Manual recordingTo turn off the auto mark function Recording CDs from a digital sourceRecording from a portable MD player MD 0 MD Edit To record from a track which is in the middle of a MiniDiscTo record only a single track What is a MINIDISC? If a problem occurs TroubleshootingMinidisc System Limitations GeneralMD recording and playback Tape recording and playbackRadio reception Moisture condensation If a problem occurs Number or Symbol Error messages Meaning Remedy∗Number or Symbol ∗SymbolSpecifications MaintenanceInternal care External careSharp Corporation