Sharp MD-X60H Recording from a CD onto a MiniDisc One-Touch Editing, If recording does not begin

Page 27

YO		<P=001>
(Continued)
		2	1
			1
			2
		4	MD
DISPLAY			3
DISPLAY
			MD
		DISPLAY	3
		DISPLAY	1
			1
	3	Stereo recording
	3
		Monaural extended length recording		Lit
	4

■Recording from a CD onto a MiniDisc (One-Touch Editing)

A CD can be recorded to a MiniDisc, starting from the first track, with a one-touch operation. More than one CD can be recorded consecutively.

1 Press the CD ■ button.

2 Load a compact disc and a recordable MiniDisc.

●The total number of tracks and the total playing time on the CD will be displayed.

●When a new recordable MiniDisc is loaded, it will take about 15 seconds to enter the recording stand-by mode.

3 Check the recording mode by pressing the REC MODE button.

●Each time the button is pressed, the display will switch between the stereo mode and the monaural long-play mode.

●This mode cannot be changed whilst recording.

●When a track which was recorded in monaural sound is played back, "M" will be displayed after the track number.

4 Press the CD 0 MD button.

●The compact discs loaded in DISC-1 - DISC-3 will be recorded in order, starting from the first track on DISC-1. When a MiniDisc runs out of recording space or when a compact disc has been completely recorded, the CD and the MD will stop automatically.

If recording does not begin

When a disc is loaded in each of DISC-1 - DISC-3, if all of the tracks on the discs cannot be recorded, the number of tracks that cannot be recorded will be displayed. Next the number of tracks that can be recorded will appear. The unit will then enter the recording stand-by mode.

Press the CD 0 MD button.

●Recording will begin, starting from the first track on DISC-1.

●After recording all of the tracks that can be recorded, the unit will stop automat- ically.

To cancel the operation:

Before pressing the CD 0 MD button, press the CD ■ or MD ■ button.

To stop recording:

Press the CD ■ or MD ■ button.

●Playback and recording will stop after the track numbers have been written to the MiniDisc.

It is not possible to pause in the recording mode.

To check the remaining time available for recording:

①Press the MD ■ button.

②Load a MiniDisc.

③Press the DISPLAY button.

●After the number of tracks are recorded, the available time remaining will be displayed, Five seconds later, the unit will return to the original display.

26

MD-X60H(SUK) TINSE0227AWZZ

Image 27

Contents Accessories ContentsIf YOU have ANY DOUBT, Consult a Qualified ELECTRI- Cian Special NotesPrecautions Names of Controls and Indicators Front panelRear panel Speaker section Display windowMD control section Remote controlRDS control section Tuner control sectionPreparation for USE Speaker connectionAerial connection Mounting the speaker grilles Connecting the AC power leadRemote control Removing the speaker grillesSetting the Clock Resetting the date and timeChecking the date and time Sound Control Display SectionCompact Disc Operation To remove the CDs Loading and playing CDsTo interrupt playback To stop playbackDirect playback When choosing a CD for playbackMinidisc Operation Loading and playing MiniDiscsRadio Operation TuningManual tuning Auto tuningFor example, to select Preset tuningTo enter stations into memory To recall a memorised stationInformation Provided by RDS Receiving FM Stations with RDS Radio Data SystemTo erase all of the contents of preset memory Aspm Auto Station Program MemoryTo stop the Aspm operation before it is complete If you have selected the traffic programme Programme typeTo manually recall the stations stored in memory To switch the displayTo cancel the EON stand-by mode Checking the stand-by mode settingEON-TI Normal playback Cassette OperationConvenient CD and MD Operations Direct-selection playApss Auto Program Search System To search very quickly To cancel repeat or random playCue and review Repeat and random playTo check which tracks are programmed To cancel the ApmsApms Automatic Programmable Music Selector To clear the programmed selectionsChanging the display during MD playback Switching the time displayWhen the MD has a track name When the MD does not have a track nameAbout track numbers RecordingDifferences from tape recordings Disc writing TOCTo stop recording To cancel the operationRecording from a CD onto a MiniDisc One-Touch Editing If recording does not beginYou can also perform the following operation To cancel the track edit operationTo cancel a programmed track To change a programmed trackTo record without using One-Touch Editing Apms recordingTo re-record To interrupt recording What is the space-cut function?Recording from the built-in radio onto a MiniDisc To record the track number whilst recordingTo record from a CD onto a MiniDisc To record from a cassette tapeTo record from the built-in radio onto a MiniDisc Synchronised Recording System Recording from a CD or an MD to a cassette tape=003 Recording from a CD Recording from a MiniDisc Recording from the built-in radio to a cassette tape Beat cancel switch on the rear panelRecording the editing results Using the editing functionEditing StepType of characters used Programmed moveTotal number of characters per MiniDisc To create a track name To create a disc nameTo add a character To change disc names and track namesTo change disc names To change track namesTo combine two non-contiguous tracks When both tracks have a nameDivide CombineMove Programmed moveExample Erase To erase tracks one at a timeTo erase all of the tracks at once To change the timer setting HOW to USE the BUILT-IN TimerTo select the timer playback mode Setting timer playbackSetting timer recording To select the timer recording modeSleep operation Simultaneous sleep and timer operation Connecting external units Using External UnitsHeadphones Connecting a portable MD playerRecording sound from an external unit Listening to sound from an external unitRecording CDs from a digital source Manual recordingTrack numbers To turn off the auto mark functionRecording from a portable MD player MD 0 MD Edit To record from a track which is in the middle of a MiniDiscTo record only a single track What is a MINIDISC? General TroubleshootingIf a problem occurs Minidisc System LimitationsMD recording and playback Tape recording and playbackRadio reception Moisture condensation If a problem occurs ∗Symbol Error messages Meaning RemedyNumber or Symbol ∗Number or SymbolExternal care MaintenanceSpecifications Internal careSharp Corporation