¤4TOP button
Pressing this button during setup returns you to the top screen of the setup main menu.
¤5DISPLAY button
This button is used to selects the display mode for the front display of the unit.
¤6INPUT 3 button
This button is for
INPUT 4 button
This button is for
¤7SETUP button
This button is used to setup for DVD and other device.
¤8SOURCE button
These buttons are used to switch the source of your A/V Receiver. Each time a source button is pressed, the remote controller changes to the source which was pressed.
This remote controller can control 10 types of equipment. To change the A/V Receiver source, press this button twice within two seconds. The signal is sent when it is pressed the second time.
Notes
•Press the AMP button to operate the unit's amplifier functions.
•Press the TUNE button to operate the unit's tuner functions.
¤9STEREO button
This button is used to select STEREO mode.
‹0AUTO button
This button is used to select auto surround.
‹1NIGHT button
Pressing this button prevents the Dolby Digital signal from playback at a loud voice.
‹2SLEEP button
This button is used for setting the sleep timer.
‹3I / 
SOURCE ON/OFF button
This button is used to turn a specific source (such as a DVD player) on or off independently from the rest of the system.
‹4SET button
This button is used to enter preset mode.
‹5SET indicator
Indicates when the preset codes of the remote controller are operated.
‹6SEND indicator
Indicates when the remote controller is transmitting a signal.
‹7Infrared Transmitter
This transmitter emits infrared light. Press the buttons while pointing the transmitter towards the infrared receiver window of the unit or other AV equipment.
ENGLISH
NAMES AND FUNCTIONS | FUNCTIONS |
NAMESAND | |
BASIC | CONNECTIONS |
BASIC | OPERATION |
ADVANCED | CONNECTIONS |
SETUP | |
ADVANCED | OPERATION |
TROUBLESHOOTING | |
OTHERS | |
7