FUNCTIONS | NAMES AND |
CONNECTIONS | BASIC |
OPERATION | BASIC |
ENGLISH
NAMES AND FUNCTIONS
FRONT PANEL
q w erty ui o!0 !1 !2
!7 !6!5 | !4 | !3 |
!1HDMI indicator
This indicator is illuminated when input terminal of the HDMI component is connected to the unit.
!2VOLUME control knob
This knob is used to adjust the overall sound level. Turning the control clockwise increases the sound level.
!3AUX1 INPUT jack
This audio input jack accept the connections of the portable audio player etc.
!4Cursor (3, 4, 1, 2) / ENTER button
FL DIPLAY AND INDICATOR
aMain Information Display
This display shows messages relating to the status, input source, surround mode, tuner, volume level or other aspects of unit’s operation.
sAUTO indicator
This indicator is illuminated when the AUTO SURROUND mode is in use.
dTUNER’s indicators
ST : This indicator is illuminated in the AUTO STEREO mode during tuner operations.
qPOWER switch and STANDBY indicator
tSOURCE DIRECT button and indicactor
Press these buttons to operate the SETUP MAIN MENU and TUNER function.
TUNED : This indicator illuminates when the tuner receives a sufficiently strong radio signal.
When this switch is pressed once, the unit turns ON and the display illuminates. When pressed again, the unit turns OFF and the STANDBY indicator will be illuminated.
When this button is pressed, the audio signal will bypass the tone control circuit to provide the pure sound quality.
In order not to bypass the tone control circuit, press SOURCE DIRECT button again.
!5INFRARED receiving sensor | f indicator | |
window | ||
|
This indicator is illuminated when the sleep timer
This window receives infrared signals for the function is in use. remote controller.
wINPUT SELECTOR knob
!6SETUP MIC jack
g MEM indicator
This knob is used to select the input sources. (See page 13)
This indicator is illuminated when the MEMORY
Automatically measure speaker characteristics function is working during tuner operations. using the included microphone. (See page 22)
CONNECTIONS | ADVANCED |
SETUP | |
OPERATION | ADVANCED |
TROUBLESHOOTING | |
eSURROUND MODE button
Press this button to select the surround mode.
rAUTO button
Press this button to select the AUTO mode from the surround modes. When this mode is selected, the unit determines the surround mode corresponding to a digital input signal automatically. (See page 27)
Press this button to enter the SETUP MAIN MENU.
uEXIT button
Press this button to exit from the SETUP MAIN MENU.
iDISPLAY button
Press this button to change the FL display mode. (See page 26)
!7PHONES jack
This jack may be used to listen to the unit’s output through a pair of headphones. (See page 28)
hPRESET indicator
This indicator is illuminated in the PRESET mode during tuner operations.
jHDMI indicator
This indicator is illuminated when a HDMI input source has been selected.
oBAND button
Press this button to switch between FM and AM in the TUNER mode.
OTHERS
!0MEMORY button
Press this button to enter the tuner preset memory numbers or station names. (See page 30)
4