Marantz NR1501 manual Video Convert Function, Examples of Connections

VIDEO CONVERT FUNCTION

The unit is equipped with a video convert function which outputs analog video input (video input or component video input) signals to HDMI.

This means that these signals can be viewed simply by connecting one HDMI cable between the unit's HDMI OUT terminal and monitor regardless of the method used to connect the player and the unit's VIDEO terminals or COMPONENT VIDEO terminals.

(For the setting procedure, see page 19.)

Notes

•With this function, the media may not be properly played in the still, fast forward, reverse play and other modes.

•With the video-convert function, out-of-sync or other types of trouble may arise depending on the TV, projector or component used. In such cases, deactivate the video-convert function.

•When the monitor has been connected to the unit’s VIDEO MONITOR OUT terminal

VIDEO	VIDEO
COMPONENT
HDMI

Note

•The HDMI video signals and component video signals that are input from the player are not output from the unit's VIDEO MONITOR OUT terminal.

ENGLISH

ADVANCED OPERATION	FUNCTIONS
NAMESAND
BASIC	CONNECTIONS
BASIC	OPERATION
ADVANCED	CONNECTIONS

EXAMPLES OF CONNECTIONS

•When the monitor has been connected to the unit's HDMI OUT terminal

VIDEO
COMPONENT
HDMI	HDMI

Note

•The signals up-converted to HDMI output signals are output without any processing at the resolution of the analog video signals that were input.

When up-converting video or component video signals with a 480i resolution, a video monitor (TV set) supporting the 480i resolution must be connected to the unit.

•When the monitor has been connected to the unit’s COMPONENT VIDEO MONITOR OUT terminal

COMPONENT	COMPONENT
VIDEO
HDMI

Note

•The HDMI video signals and video signals that are input from the player are not output from the unit's COMPONENT MONITOR OUT terminal.

SETUP

ADVANCED OPERATION

TROUBLESHOOTING

OTHERS

29