Panasonic CQ-5335U operating instructions Specifications

Page 28

Specifications

❐ General

Power Supply:

12 V DC (11 V-16 V) test Voltage 14.4 V, Negative ground

Current consumption:

Less than 2.5 A (CD mode, 0.5 W 4-speaker)

Maximum Power Output:

37 W ⋅ 4 channels at 400 Hz, Volume Control maximum

Tone adjustment range:

 

Bass:

± 12 dB at 100 Hz

Treble:

± 12 dB at 10 kHz

Power Output:

18 W per channel into 4 ohms, 40 to 30 000 Hz at 3 % THD

Suitable Speaker Impedance:

4-8 1

Dimensions (W ⋅ H ⋅ D):

7" ⋅ 1-15/16" ⋅ 6-1/10" (178 ⋅ 50 ⋅ 160 mm)

Weight:

3 lbs. 12 oz (1.7kg)

❐ FM Stereo Radio

Frequency Range:

87.9-107.9 MHz

Useable Sensitivity:

12 dBf. (1.1

µV/ 75 1, S/N 30 dB)

50 dB Quieting Sensitivity:

17 dBf. (1.8

µV/ 75 1)

Frequency Response:

30-15 000 Hz ±3 dB

Alternate Channel Selectivity:

75 dB

 

Stereo Separation:

35 dB at 1 kHz

Signal/Noise Ratio:

70 dB (Mono)

❐ AM Radio

Frequency range:

530 kHz–1 710 kHz

Usable sensitivity:

28 dB/µV (25 µV, S/N 20 dB)

❐Weather Band Radio

Frequency range:

162.40 –162.55 MHz

Usable sensitivity:

3 dB/µV (S/N 20 dB)

Signal/Noise Ratio (40 dB/µV):

50 dB

❐ CD Player

Sampling Frequency:

32 times over sampling

DA Converter:

MASH•1 bit/4 DAC System

Error Correction System:

Panasonic Super Decoding Algorithm

Pick-Up Type:

1-beam

Light Source:

Semiconductor laser

Wavalength:

780 nm

Frequency Response:

20 - 20,000 Hz (±1 dB)

Signal to Noise Ratio:

85 dB

Total Harmonic Distortion:

0.01 % (1 kHz)

Wow and Flutter:

Below measurable limits

Channel Separation:

75 dB

Above specifications comply with EIA standards.

Note: Specifications and the design are subject to modification without notice due to improvements in technology.

28

CQ-5335U

Page 27 Page 29
Image 28
Page 27 Page 29
Contents CQ-5335U Safety Information Following applies only in the U.S.ALaser Products Wave length 780 nm FCC WarningWhen Driving When Washing Your CarUse Authorized Service centers When ParkedContents Power and Sound Controls PowerVolume LoudnessIllumination Switching BassTreble BalanceClock Setting Time ResetSelecting the Clock Display Initial TimeAlarm Time Setting Initial Alarm TimeAlarm Operation Alarm output Volume SelectionRadio Radio Preset Station Setting Auto Preset Memory APMManual Preset Memory Preset Station CallingTuning in a Weather Band Station Weather Band StationsCD Player Disc Insert and Playback Disc insertStop and Disc Eject Listening to a CDTrack Selection Track Search Repeat play Random play Scan playCD Changer mode CD Changer ControlDisc Selection Track SelectionRemote Control Scan Play Tracks DiscsRepeat Play Tracks Discs Random Play Tracks DiscsPreliminary Steps TroubleshootingCommon Select other stations of higher signal level Clean disc, referring to the section on Notes on DiscsRadio Extend fully the radio antennaSound Setting Adjust mounting angle to less than 30˚Connect the speaker wires to the correct ones Trouble Sound skips due to vibration Disc is not ejectedError Display Messages CD changerCheck the disc Select the next available compact disc. Check the discCleaning this Unit MaintenanceCare of the Unit Speaker Connections Product ServicingWrong ChassisInstallation Guide Dashboard SpecificationsPanasonic Servicenter List for Service Directory OverviewInstallation Dashboard InstallationInstallation Hardware Using the rubber cushion optionMounting springs C ExampleTo Remove the Unit from the vehicles dashboard Insert each Removal Tool i and pull Removal Tool U-shapedElectrical Connections Wiring DiagramCD Receiver Not used Specifications Memo Memo
Top Page Image Contents