Safety

1.0 Read Owner’s Manual

When shipping the VORTEX amplifier, always use the original shipping carton and packing materials. For maximum protection, repack the unit as it was originally packed at the factory.

2.0 Environments

Use this amplifier only in E1, E2, E3 or E4 environments according EN55103-2.

3.0 Ventilation

Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. This product should not be installed unless proper ventilation is provided or manufacturer’s instructions have been adhered to.

4.0 Water & Moisture

Do not use this product near water (for example, in a wet basement or near a swimming pool)

5.0 Cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners.

6.0 Power-cord Protection

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon them or against them, paying particular attention to cords and plugs, and the point where they exit from the product.

7.0 Lightning

For added protection of this product during storms, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges.

8.0 Object And Liquid Entry

Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

9.0 Accessories

Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury, and serious damage to the product. Any mounting of the product should follow the manufacturers instructions, and should use a mounting accessory recommended by the manufacturer.

10.0 Connecting

When you connect the amplifier to other equipment, turn off the power and unplug all of the equipment from the supply source. Failure to do so may cause an electric shock and serious personal injury. Read the owner’s manual of the other equipment carefully and follow the instructions when making the connections.

11.0 Sound Volume

Reduce the volume to minimum before you turn on the product to prevent sudden high levels which may cause hearing or speaker damage.

12.0 Damage Requiring Service

Unplug this product from the mains supply and refer to your dealer/distributor under the following conditions:

When the power-supply cord is damaged

If liquid has been spilled, or objects have fallen into the product

If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to

P.4	CAMCO USER MANUAL
	VORTEX POWER AMP SERIES