Mitsubishi Electronics MDT651S manual CAT5 Tx BOX, FrontRear, Gnd

Page 16

Parts Name and Functions (continued)

CAT5 Tx BOX

FrontRear

1USB (B type)

Connector for receiving the power supplied from the USB device such as the computer. By connecting a USB cable, you can control the CAT5 Tx BOX using the control commands transmitted over the USB cable.

CAUTION:

We have checked that the power is supplied and the control commands are transmitted properly via the USB connector by connecting it with our computers according to the USB standards.

When the CAT5 Tx BOX is combined with your computer system or USB hub system, check in advance that it operates properly.

2EXTERNAL CONTROL (D-SUB 9-pin)

When the communication via the USB connector is unusable, this connector can be used for RS-232C communication with the control device such as the computer.

NOTE:

RS-232C connection isn’t necessary when the COM port number set by the USB driver is used. Make selection using the input select switch (USB/RS-232C) ( 5 ), as necessary.

3RGB IN (MINI D-SUB 15-pin)

Connector for receiving the analog RGB video signal from the computer.

4RGB OUT (MINI D-SUB 15-pin)

Video connector for buffering and outputting the analog RGB video signal received by the RGB IN connector ( 3 ).

5Input select switch (USB/RS-232C)

Switches the control input between the USB connector and the RS-232C connector.

6CAT5 OUT (Modular connector 8-pin)

Connector for converting and outputting the video signal received by the RGB IN connector ( 3 ) and the control signal transmitted via the USB connector ( 1 ) or the RS-232C connector ( 2 ) to transmit them on the CAT5 long cable.

CAUTION:

Never connect network devices to the CAT5 IN and OUT connectors. If you do so, they may adversely affect with each other, causing breakdown.

7Composite sync signal level switch

Switches the composite sync signal level.

The TTL level and the 0.3 V level are switched.

8Auxiliary power supply input connector (DC IN

5 V)

Though the power is supplied from the above-mentioned USB connector, an auxiliary DC power adapter (commercially available) is also available. When +5 V (according to the product specifications) is supplied from the above-mentioned DC power adapter, the power supply is automatically switched from the USB connector. (You cannot use both at the same time.)

CAUTION:

•Don’t apply a voltage out of the specified range to the auxiliary power supply input connector or connect it with incorrect polarity. If you do so, the connected devices may be overheated or damaged.

•The auxiliary power supply input connector isn’t intended for general use. Commercial DC power connectors are available in different shapes. When you want to use this connector, consult a qualified electrician or your dealer in advance.

Power connector type: DC jack R/A type (Diameter of the

center pin: 2.0 mm)

Pin

Name

Definition

2

1

1

+5 V

DC Power source

 

 

2

GND

GND

 

 

Downloaded From TV-Manual.com Manuals

English-12

 

Page 15 Page 17
Image 16
Page 15 Page 17
Contents LCD Display Monitor Page English Page Index Features Important Information Declaration of ConformityImportant Information Declaration Declaration of the ManufacturerRecommend Use ErgonomicsContents Parts Name and Functions Buttons, Switch, and IndicatorFront Rear Control buttons Connectors and Terminals Parts Name and FunctionsAnti-theft lock slot VideoWireless Remote Control DescriptionHow to install the batteries How to Use the Wireless Remote ControlHow to remove the batteries FrontRear CAT5 Tx BOXGND Preparation for use Flow of preparationDetermine the installation location 1Preparation for installationDo not Attempt to Install the LCD Monitor by Yourself Using the monitor without the bezel Installing the monitorLay the screen face down 2Installing the monitor Installing in the portrait positionHow to set-up ConditionsBefore connecting the signal cable to PC and Video How to install the optional speakers4Connection procedure Wiring diagramPrevention of disconnection of Hdmi cable Before making connections4Connection procedure Connecting with a computer analog connectionAnalog connection Connection via RGB3 in D-SUB connector Second monitor connectionConnecting with a computer digital connection Factory preset timingConnection via the RGB2 in connector DVI-D Connection via the RGB6 in connector DisplayPortConnecting a video device component video/HDMI device DVD player Component deviceVideo device Composite video/S video device Connecting CAT5 How to install Installation to Windows XPInstallation to Windows Vista Connection to one monitorAllowable cable length 5Connecting CAT5CAT5 EQ Connecting RS-232C Monitor control via RS-232C7Connecting LAN Monitor connection using LAN8Connecting the power cord to the monitor Connecting the power sourceHow to Use Flow of How to UsingPower Management Function Power Indicator1Turning on all the connected devices Turning on external devices2Selecting the video input 3Controlling the external devices 4Selecting the OSD language5Auto-setup 6Selecting the picture mode7Screen adjustment 8Picture adjustment9Volume control 10Schedule setting10Schedule setting How to set up schedule11Remote control RS-232C/RS-485 Remote controlRemote control 11Remote control LAN Remote controlSub menu Adjustment items Adjustment status Configuration of OSD screenMain Menu Screen Main menu Operation buttons Key guideConfiguration and basic operation of OSD screen Basic operation of OSDOSD screen functions PicturePicture Reset OSD screen functionsAuto Brightness PrimaryScreen Audio Reset AudioBalance TreblePIP Picture in Picture CONFIGURATION1 CONFIGURATION2 Date and Time ScheduleMonitor Information Advanced Option Power on Delay Terminal SettingAdvanced Option Reset Heat StatusPicture mode Control Lock modeOther functions Picture sizeOther functions Supplemental information of the auto brightness functionTo control multiple monitors collectively To use a computer to control the monitorsPIP, POP function PIP POP Side by Side OFF Aspect FullReference PIP Size SmallRemote control numbering function Troubleshooting Specifications Vesa DPM Vesa DDC2B, DDC/CIPin Assignment Pin Assignment
Top Page Image Contents