OSD screen functions (continued)
SCHEDULE
You can program the LCD monitor operation schedules. (See page 35.)
< HOW TO SETUP SCHEDULE >
Using the “SCHEDULE” function allows you to set up to seven different scheduled time intervals when the LCD Monitor will be activated.
You can select the time the monitor turns on and turns off, the day of week the monitor is activated, and which input source the monitor will use for each scheduled activation period. A check mark in the box next to the number of the schedule indicates that the selected schedule is in effect. To select which schedule to set, use the up/down arrows to move the number (1 to 7) of the schedule.
Use the (+) and 
and 
buttons to increase the time and select the input port. The “SET” button is used to make a selection.
If you create a schedule but do not want to set the power on time, select
If you do not want to use a power off time select
If there is no input selected
The selection of EVERY DAY within a schedule takes priority over other schedules that are set up to operate weekly. When schedules are overlapping, scheduled Power ON time has priority over scheduled Power OFF time.
If there are two schedules programmed for the same time, then the highest numbered schedule has priority.
When OFF TIMER is enabled, the “SCHEDULE” settings are disabled.
DATE AND TIME
You can adjust the current date and time for the internal clock.
You must set this item when using SCHEDULE.
After competing the setting, be sure to press the SET button (button 5 on page 10).
MONITOR INFORMATION
The model name and the serial number of your monitor are displayed.
Downloaded From | |
|