OSD screen functions (continued)
CONFIGURATION1
AUTO SETUP
* For the RGB3 and RGB4 inputs only.
Press the SET button to automatically adjust the screen size, horizontal position, vertical position, clock, clock phase, white level, and black level.
AUTO ADJUST
* For the RGB3 and RGB4 inputs only.
When AUTO ADJUST is ON, the horizontal position, vertical position, and clock phase are automatically adjusted at the time of the timing switching.
POWER SAVE
When you select ON, the power management function (power save) is activated.
When the RGB1, RGB2, RGB3, RGB4, RGB5, or RGB6 input is selected, the monitor goes into the sleep mode in several seconds after the sync signal is lost.
When the DVD/HD or VIDEO input is selected, the monitor goes into the sleep mode in about 10 minutes after the input signal is lost.
LANGUAGE
OSD control menus are available in eight languages. (English, German, Spanish, French, Italian, Swedish, Chinese, and Japanese)
SCREEN SAVER
You can set the SCREEN SAVER functions to reduce the risk of “image persistence.”
GAMMA:
When you select ON, the gamma mode where image persistence is difficult to occur is used.
COOLING FAN:
When you select ON, the cooling fan always runs.
When you select AUTO, the
BRIGHTNESS:
When you select ON, the brightness decreases.
MOTION:
The screen slightly moves horizontally and vertically at regular intervals to reduce the effect of the image persistence.
NOTE: When you select a time period in the MOTION setting, the monitor enlarges the image and moves it horizontally and vertically. The portions of the image out of the display area aren’t visible.
To make the entire image visible all the time, arrange it to fit within 90% of the screen area at the center.
EnlargedMove
The portion (shaded part) outside the display area isn’t displayed.
Motion
90%
COLOR SYSTEM
* For the VIDEO<S> and VIDEO inputs only.
You can select the color system depending on the video device you use.
AUTO: | NTSC, PAL, SECAM, PAL60 or 4.43 NTSC is |
| automatically selected. |
NTSC: | NTSC |
PAL: | PAL |
SECAM: | SECAM |
4.43NTSC: | 4.43 NTSC |
PAL60 |
NOTE: When you use a video device purchased from overseas, set the COLOR SYSTEM menu.
SIDE BORDER COLOR
You can adjust the brightness of the black areas displayed on both sides of 4:3 images.
CONFIGURATION RESET
You can reset all the CONFIGURATION1 and CONFIGURATION2 settings to the factory defaults. Note that you cannot reset the setting of LANGUAGE, MONITOR ID, SCHEDULE, and DATE AND TIME.
FACTORY RESET
You can reset all the settings of PICTURE, SCREEN, AUDIO, CONFIGURATION1, CONFIGURATION2, and ADVANCED OPTION to the factory defaults.
Note that you cannot reset the settings of LANGUAGE and
DATE AND TIME.
Downloaded From | |
|