Mitsubishi Electronics MDT651S manual Connecting CAT5, How to install Installation to Windows XP

Page 27

P-5

Connecting CAT5

 

 

Carry out as necessary

 

 

 

 

 

CAT5 for long-distance connection

or multiple-monitor connection

The CAT5 video connection function is for transmitting the analog RGB video signal of the computer and the control signal of the monitor over a long distance using CAT5 cables. The computer can control the monitor via the supplied CAT5 Tx BOX.

CAUTION:

Never connect network devices (such as a hub and a computer for LAN) to the CAT5 Tx BOX and the IN and OUT connectors of the monitor. If they are connected, the network devices themselves, CAT5 Tx BOX, and monitor may be damaged.

1. Installation of the USB driver for CAT5 serial communication control

To connect the computer and the CAT5 Tx BOX via USB interface, it is necessary to install the USB driver to the computer from the CD-ROM supplied with the monitor.

(When connecting the computer and the CAT5 Tx BOX via RS-232C interface, you don’t have to install the USB driver.)

OS supported: Windows® XP, Windows Vista®

How to install:

1) Installation to Windows® XP

Start the “PL2303-Driver_XP2K_v******.exe” file in the Windows XP folder on the CD-ROM supplied with the monitor

and install the driver according to the instructions displayed on the screen.

2) Installation to Windows Vista®

Start the “PL2303_Prolific_Vista_******.exe” file in the Windows VISTA folder on the CD-ROM supplied with the

monitor and install the driver according to the instructions displayed on the screen.

NOTE:

It is unnecessary to install the USB driver if you don’t use the communication control or the USB driver. When the window asking you to install the driver is displayed, select cancel.

As for the latest driver for the Windows operating system, check the operation of the interface IC “PL-2203” in advance, referring to the website of Prolific Technology Inc. Prolific Technology Inc. and Mitsubishi don’t assume any responsibility or liability for any damages incurred by the user.

Operation check by Mitsubishi

•File name: PL2303_Prolific_DriverInstaller_v110.zip, Release

date: December 2, 2009, Version: V1.1.0

Windows XP (32 bits): Operated

Windows Vista (32 bits): Operated

Windows 7 (32 bits): Operated

2. Connection of the CAT5 video connection function

There are two cases of connection.

1) Connection to one monitor

Computer

USB cable (commercially available)

CAT5 cable (commercially available) CAT5 Tx BOX (accessory)

Monitor

Signal cable (Mini D-SUB 15-pin to Mini D-SUB 15-pin) (accessory)

1.Connect the USB connector of the supplied CAT5 Tx BOX and that of the computer using a commercially available USB cable. (When the USB driver isn’t available, connect an RS-232C cable in addition to the USB cable. In this case, the RS-232C cable serves for supplying the power to the CAT5 Tx BOX.) See page 36.

2.Connect the RGB input connector (Mini D-SUB 15-pin) of the CAT5 Tx BOX and the D-SUB output connector of the computer using the signal cable (Mini D-SUB 15-pin to Mini D-SUB 15-pin) supplied with the monitor.

3.Connect the CAT5 output connector (Modular connector 8-pin) of the CAT5 Tx BOX and the IN connector of the RGB5/CAT5 input/output connector (Modular connector

8-pin) of the monitor using a commercially available CAT5 cable.

2) Connection to multiple monitors

Computer

USB cable (commercially available)

 

CAT5 cable (commercially available)

 

CAT5 Tx BOX

 

(accessory)

 

Monitor

 

(first monitor)

Signal cable (Mini D-SUB

 

Monitor

15-pin to Mini D-SUB 15-pin)

(accessory)

(second monitor)

 

CAT5 cable (commercially available)

1.In addition to the connection described in 2-1), connect the OUT connector of the RGB5/CAT5 input/output connector (Modular connector 8-pin) of the first monitor and the

IN connector of the RGB5/CAT5 input/output connector (Modular connector 8-pin) of the second monitor using a commercially available CAT5 cable.

2.Connect the third and later monitors in the same way. You can connect up to 5 monitors.

English

Downloaded From TV-Manual.com Manuals

English-23

 

Page 26 Page 28
Image 27
Page 26 Page 28
Contents LCD Display Monitor Page English Page Index Features Declaration of Conformity Important InformationImportant Information Declaration of the Manufacturer DeclarationErgonomics Recommend UseContents Buttons, Switch, and Indicator Parts Name and FunctionsFront Rear Control buttons Video Connectors and TerminalsParts Name and Functions Anti-theft lock slotDescription Wireless Remote ControlHow to Use the Wireless Remote Control How to install the batteriesHow to remove the batteries CAT5 Tx BOX FrontRearGND Flow of preparation Preparation for use1Preparation for installation Determine the installation locationDo not Attempt to Install the LCD Monitor by Yourself Installing the monitor Using the monitor without the bezelLay the screen face down Conditions 2Installing the monitorInstalling in the portrait position How to set-upHow to install the optional speakers Before connecting the signal cable to PC and VideoBefore making connections 4Connection procedureWiring diagram Prevention of disconnection of Hdmi cableSecond monitor connection 4Connection procedureConnecting with a computer analog connection Analog connection Connection via RGB3 in D-SUB connectorConnection via the RGB6 in connector DisplayPort Connecting with a computer digital connectionFactory preset timing Connection via the RGB2 in connector DVI-DDVD player Component device Connecting a video device component video/HDMI deviceVideo device Composite video/S video device Connection to one monitor Connecting CAT5How to install Installation to Windows XP Installation to Windows Vista5Connecting CAT5 Allowable cable lengthCAT5 EQ Monitor control via RS-232C Connecting RS-232CMonitor connection using LAN 7Connecting LANConnecting the power source 8Connecting the power cord to the monitorFlow of How to Using How to UseTurning on external devices Power Management FunctionPower Indicator 1Turning on all the connected devices2Selecting the video input 4Selecting the OSD language 3Controlling the external devices6Selecting the picture mode 5Auto-setup8Picture adjustment 7Screen adjustment10Schedule setting 9Volume controlHow to set up schedule 10Schedule settingRS-232C/RS-485 Remote control 11Remote controlRemote control LAN Remote control 11Remote controlOperation buttons Key guide Sub menu Adjustment items Adjustment statusConfiguration of OSD screen Main Menu Screen Main menuBasic operation of OSD Configuration and basic operation of OSD screenPicture OSD screen functionsPrimary Picture ResetOSD screen functions Auto BrightnessScreen Treble Audio ResetAudio BalancePIP Picture in Picture CONFIGURATION1 CONFIGURATION2 Schedule Date and TimeMonitor Information Advanced Option Heat Status Power on DelayTerminal Setting Advanced Option ResetPicture size Picture modeControl Lock mode Other functionsTo use a computer to control the monitors Other functionsSupplemental information of the auto brightness function To control multiple monitors collectivelyPIP Size Small PIP, POP functionPIP POP Side by Side OFF Aspect Full ReferenceRemote control numbering function Troubleshooting Vesa DPM Vesa DDC2B, DDC/CI SpecificationsPin Assignment Pin Assignment
Top Page Image Contents