Mitsubishi Electronics LDT52IV (MT819) Adjustments for PC screen display, „Automatic adjustment

Menu Items

(5) INPUT

Specifies the input mode at power-on. When not specifying, the screen at the previous power-off appears.

Input modes displayed on “PC1/AV1” depend on DVI SELECT settings.

Input modes displayed on “PC2/AV2” depend on HDMI SELECT settings.

Input modes displayed on “PC4/AV3” depend on BNC SELECT settings.

Caution

•Do not switch off the main power after setting the

SCHEDULE.

•Specify the correct date and time. (See page 7.) SCHEDULE does not function unless the date and time are specified.

•Check regularly that the set date and time are correct.

TIPS

•Up to 8 SCHEDULE items can be registered.

•Setting the SCHEDULE flashes the power LED alternately in red and orange in standby mode.

•A SCHEDULE that has a large number has precedence over that of a small number when schedules overlap.

„ADVANCED items (AV input) (See page 6.)

FLESH TONE

Adjust the hue control.

3D-NR

Reduce the noise of playback images on video.

Setting a higher level reduces more noise. However, it may cause blurring on an image.

MPEG-NR

Reduce block noise caused by digital compression.

3D-Y/C (AV5)

Specify whether to perform 3-dimension Y/C separation. If dot interference or cross-color is occurring in fast-motion scenes, selecting “OFF” may improve the image quality.

C.M.S.-HUE

Adjusts color tone with 6 colors of R (red), Y (yellow), G (green), C (cyan), B (blue), and M (magenta).

C.M.S.-SATURATION

Adjusts color vividness with 6 colors of R (red), Y (yellow), G (green), C (cyan), B (blue), and M (magenta).

C.M.S.-VALUE

Adjusts color brightness with 6 colors of R (red), Y (yellow), G (green), C (cyan), B (blue), and M (magenta).

TIPS

•When FLESH TONE is set to LOW or HIGH, C.M.S.-HUE/ -SATURATION/-VALUE cannot be set.

Adjustments for PC screen display

„Automatic adjustment

When you use the PC3 input terminal or PC4 input terminals to display a PC screen for the first time, or when you change the setting of the PC, use the automatic screen adjustment.

1.Switch the input to PC3 or to PC4 and display the adjustment pattern. (See the description below.)

2.Press MENU and use or to display the SCREEN menu.

3.Press and select “AUTO”.

4.Press .

The automatic adjustment is complete in several seconds.

5.Press MENU twice to close the menu screen.

TIPS

•If the screen cannot be adjusted properly with one automatic adjustment, repeat the automatic adjustment two or three times. Try manual adjustment if necessary.

„Screen display for adjustment

Before making adjustments in the SCREEN menu or PICTURE menu, display an image to brighten the entire screen. If you are using a Windows PC, use the adjustment pattern on the supplied CD-ROM.

Opening the adjustment pattern

1.Load the supplied CD-ROM into the computer’s CD- ROM drive.

2.Open the CD-ROM in [My Computer].

3.Double-click [Adj_uty.exe].

The adjustment pattern will appear.

Adjust the screen automatically or manually.

4.When adjustment is finished, press the [Esc] on the computer’s keyboard to quit the adjustment program.

5.Eject the CD-ROM from the CD-ROM drive.

TIPS

•If the display mode on the computer you are using is 65,000 colors, the color levels in the color pattern may appear differently or grayscale may appear to be colored. (This is due to the specifications of the input signal and is not a malfunction.)

Downloaded From TV-Manual.com Manuals

E 10