Mitsubishi Electronics LDT52IV (MT819) manual Service & Support URL Information

Page 28

Controlling the Monitor with a PC (LAN)

SERVICE & SUPPORT

(URL INFORMATION)

You can display a speciﬁc URL in the URL INFORMATION ﬁeld on the INFORMATION screen when an error occurs in the monitor. (See page 24.)

URL INFORMATION

Enter a URL to display when an error occurs on the monitor. Up to 64 alphanumeric characters or symbols can be used.

CONDITION

Specify the condition to display the URL.

CONFIRMATION

The home page of the speciﬁed URL is displayed.

You can check whether the URL you entered is correct.

TIPS

•It is also possible to specify the message text, such as the name of a contact or a telephone number, to be displayed instead of the linked URL.

Downloaded From TV-Manual.com Manuals

E 28

Image 28

Contents Operation Guide Contents Basic Operation MuteMenu DisplayBasic Operation „Switching the screen size Wide Zoom NormalDot by Dot Cut offMenu Items Displaying the menu screen„Example of operation „Menu screen display„SETUP Menu item details„SCREEN „PICTURE„OPTION „PIP/PbyP „ENLARGE PC input„Dual screen display Power „Enlarge„SCHEDULE ENLARGE-POSAdjustments for PC screen display „Automatic adjustment„Screen display for adjustment „ADVANCED items AV input See11 E Communication procedure Controlling the Monitor with a PC RS-232CPC connection Communication conditions„Response code format 13 E„ID numbers Wait ← „Repeater control command Volume settings for all monitors are returned15 E Controlling the Monitor with a PC RS-232C „Repeater controlRS-232C command table Power control/Input mode selectionHow to read the command table Controlling the Monitor with a PC RS-232CControlling the Monitor with a PC RS-232C Picture menu 17 EAudio menu Controlling the Monitor with a PC RS-232C Setup menu Option menu19 E Image Position Epos settingHorizontal orientation Vertical orientation Controlling the Monitor with a PC RS-232C PIP/PbyP menu Initialization/Functional Restriction Setting Function menuOthers Settings to connect to a LAN Controlling the Monitor with a PC LAN21 E „ To set on the monitorDefault Gateway 0.0 This monitor is factory preset as shown below IP AddressControlling the Monitor with a PC LAN „ To set from a PC 23 E Controlling with a PCControlling the Monitor with a PC LAN „ Basic operation„ Information Standby mode, Power on is the operation available„ Control 25 E „ Network LAN Setup„ Network Security „ Network General „ Mail Originator„ Mail Recipient 27 E„ Mail Periodical URL Information „ Service & Support URL InformationSpecify the condition to display the URL M O 29 EMitsubishi Contact Information North America