Mitsubishi Electronics LDT52IV (MT819) manual „ Information, „ Control

Page 24

Controlling the Monitor with a PC (LAN)

„ INFORMATION

„ ADJUSTMENT

Information about this monitor appears.

You can adjust these settings which are also available on the monitor’s menu.

SCREEN (See page 6.)

PICTURE (See Page 6.)

PICTURE (ADVANCED) (See Page 6.)

AUDIO (See page 6.)

SETUP (See page 7.)

OPTION (See page 7.)

SCHEDULE (See page 9.)

ENLARGE (See page 9.)

PIP/PbyP (See page 8.)

FUNCTION (See page 11.)

„CONTROL

You can control the operations corresponding to the buttons (POWER INPUT SIZE ) on the remote control unit. (See page 3.)

TIPS

• In standby mode, Power ON is the operation available.

Downloaded From TV-Manual.com Manuals

E 24

Image 24
Contents Operation Guide Contents Basic Operation MuteMenu DisplayBasic Operation „Switching the screen size Wide Zoom NormalDot by Dot Cut offMenu Items Displaying the menu screen„Example of operation „Menu screen display„SETUP Menu item details„SCREEN „PICTURE„OPTION „ENLARGE PC input „PIP/PbyP„Dual screen display Power „Enlarge„SCHEDULE ENLARGE-POSAdjustments for PC screen display „Automatic adjustment„Screen display for adjustment „ADVANCED items AV input See11 E Communication procedure Controlling the Monitor with a PC RS-232CPC connection Communication conditions13 E „Response code format„ID numbers Wait ← „Repeater control command Volume settings for all monitors are returned15 E Controlling the Monitor with a PC RS-232C „Repeater controlRS-232C command table Power control/Input mode selectionHow to read the command table Controlling the Monitor with a PC RS-232C17 E Controlling the Monitor with a PC RS-232C Picture menuAudio menu Controlling the Monitor with a PC RS-232C Setup menu Option menuImage Position Epos setting 19 EHorizontal orientation Vertical orientation Initialization/Functional Restriction Setting Function menu Controlling the Monitor with a PC RS-232C PIP/PbyP menuOthers Settings to connect to a LAN Controlling the Monitor with a PC LAN21 E „ To set on the monitorThis monitor is factory preset as shown below IP Address Default Gateway 0.0Controlling the Monitor with a PC LAN „ To set from a PC 23 E Controlling with a PCControlling the Monitor with a PC LAN „ Basic operationStandby mode, Power on is the operation available „ Information„ Control „ Network LAN Setup 25 E„ Network Security „ Network General „ Mail Originator27 E „ Mail Recipient„ Mail Periodical „ Service & Support URL Information URL InformationSpecify the condition to display the URL M O 29 EMitsubishi Contact Information North America